Expandable Pencil Case / Paint Brush Holder – Quick Pull-to-Open, Push-to-Close
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€8.51 – €10.40 net (excluding VAT)
For file: pencilcasebottom_0.28mm_PETG_MK3S_10h34m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €9.45 excluding VAT (range midpoint).
- Weight reported by the author
- 102 g
- Print time reported by the author
- 10.56 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Pull to open, push to close—no twisting necessary. Expand to the length you need. Collapsed length 8", Expands to 14".
- Rating
- 4.667 / 5
- Likes
- 51
- Downloads
- 167
- Makes
- 3
- Views
- 1,086
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
Introduction:
This case features a flexible lid and base that allow for quick pull-to-open and push-to-close use, while full-length threads keep the lid securely in place. The threaded design also allows you to adjust the length to fit your needs—expanding up to 14" and collapsing down to 8". Ideal for pencils, pens, brushes, or similar tools.
Print Settings:
- Nozzle: 0.4 mm
- Layer Height: 0.28 mm
- Supports: No
- Material:
- PETG (recommended) – provides the necessary flexibility for smooth opening and closing
- PLA (not recommended) – too rigid for quick opening and closing, but threads fine. (tested)
- Infill: 15% Gyroid
- Perimeters: 2
Change Log:
- v1.0 - 08/26/2025
- Initial Release