1 / 6
Flashlight Holder for NEBO Mini Larry 500 Light
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vertical clip/holder for NEBO Mini Larry 500 Flashlight
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Needed a way to hold this flashlight on the Proaim Camera Assistant Front Tray I use in the studio. I didn't like just setting it into a place in the tray, so I made this flashlight holder that sticks to the front of the tray. Now I can easily grab the light and when I'm done with it, I can just clip the light back in.
Details:
Print Settings:
- Print part as orientated with main section on the plate
- Material: PETG for flexibility
- Nozzle: 0.4mm
- Layer Height: 0.2mm-0.3mm
- Infill: 15%
- Wall Count: 2-3
- Top/Bottom Layers: 3-4
- Supports: None
Install:
- Apply ½" double-sided tape in the channel on the rear of the part
- Stick to whatever vertical surface you want
Notes:
- Holder was designed to hold the light with the belt clip facing outwards. Otherwise the light can be orientated up or down in the holder.