Liczymy pasujące modele…
Print & replace orignal Print in PETG or PC Weight in PC is 5.3g tested and works fine Please leave a like if you downloaded it :-)
only dupont connectors needed remove the plastic and bend the pins accordingly(2mm between pins at the end) the pins should stick out about 1~1.5mm out from the surface if you can't make this just buy this…
An upgrade to Monorim MX0 to allow stable rides without wobbles way beyond the 100kmh barrier. Needs sheetmetal manufact
Gashebel für E-Scooter Ninebot
Hi, I've made remix existing Geprc GPS mount and fit it to use with GEPRC Cinebot30. You can use it with two antenas RX and VTX. Best to print from TPU or other flexible filament.
Wall mount for Ninebot ES2 Scooter. Can be attached with strong double-sided tape or screw into wall. I would recommend resting the scooter front wheel on the ground and use the mount to brace the scooter to the wall. **** I would not…
Combined can holder and hook for attaching to steering shaft. M3x5 screws + nuts used.
Update03: Added Bracket for heat inserts M3x4x5mm. Update02: Added bottom hook for U-LOCK - ULTRA COMBO 245/153C. Update01: Addetd top hook for 25mm thick shackles with inner Diameter 100mm. Since theft protection is an important issue…
Ein einfacher Schlüsselanhänger, 6cm x 2.5cm groß
promáčklé barely pro modelovou železnici 1:87 nebo 1:120
A Flexible Sock to go over the Scooter's side stand. Reduces chance of damage to floors and ankles and shins. I used: Filaform RED90A 0.8mm Solex Nozzle 100% infill If you place the closed end on the build plate, no supports are required.…
full twist throttle for your ninebot scooter
infill:30-100 supports: yes brim: optional walls: 2-4
Pencil holder, prints quite well without popdper. Petg material is better for printing.
JREV Floor Extension
I redesigned this hook to both improve the general look and feel to more seamlessly blend in with the general design of the Segway Ninebot Scooter and I also wanted to make it stronger and more effort to remove. This hook can easily…
This is a simple, fully 3D-printable charging port for the Ninebot G30/G2, designed with flexibility in mind. You can choose between versions that accommodate an XT60 connector with or without a button, depending on the file you select.…
Taschenhalter für Segway Ninebot Max G30D II Die Tasche wird normal Innen befestigt. Ich bin jedes Mal beim Auf oder Absteigen daran hängen geblieben. Wenn man sie Vorne und am Lenker befestigt, wird das Licht verdeckt und man kommt…
Ninebot G30 Spacer is used to install a bigger battery in the battery compartment. This is my version with 7mm walls. If needed you can grind down the top siderails where the spacer is mounted for even more space. Perfect for…
Rear Axle Bracket as reinforcement and for 125mm axle drop out motor brake disc mount adapter
DO NOT REPOST ANY PART OF THIS MODEL WITHOUT PROPER ATTRIBUTION! FOLLOW THE CREATIVE COMMONS ATTRIBUTION NON-COMMERCIAL SHARE-ALIKE LICENSE TERMS! USE THE REMIX BUTTON! This was more of an experiment to see if I could create such a thing,…
Disclaimer: These could be used as a permanent solution, however because there's nothing stopping the duct from clamping onto the prop you will almost certainly be blowing props whenever you bump things. As pictured it was printed in…
Original Antenna mount by "lukaskroll" on Thingiverse. I have modified one of his models to accommodate the GM10 Mini v3 GPS.
Runebound 3rd edition insert with enough space for all the expansions and compatible with sleeved cards. It is designed for for combat tokens in capsules (29mm interior diameter) You need to print one of each except: Combat_Tokens_x15:…
The parts "Clip", "main-short" and "crew" are from the original model of the author PlasticBarista I designed a new "jaw" part because I had already broken the original model several times. It has two holes for 6mm aluminum rods. Hardware…
These models extend the handlebars of a G30P 25mm for better control. For use with stock grips. This update vastly improves rideability of the scooter. Snug fit, will require a rubber mallet and finesse. I suggest printing more than two.…
Base holder is made out of two parts, front and back. Update 20240806: There is now a V2 with mountable threads also for front and back, can be combined with old V1 for left, back and right or left, front and right mounting. Screws and…
An original fantasy warrior sculpted in a powerful, stone-like form.
A practical modification for your e-scooter
From thumb throttle to hand throttle
For Ninebot Es1 Es2 Es3 Es4 kickscooters.
I modeled this handle to carry this scooter more easily by one hand, if mounted as in photo, its quite balanced. If you want, you can print one piece of “Handle clamp hole” so you can carry your allen key here as in photo. I've been using…
I created a clip for a Ninebot G30P electric scooter to attach a cup holder. I used one of the Rivian Cup Holder cups and added a custom flower. The flower petals and center are each separate bodies so they can be colored independently…
Handlebar Bracket for 31.8mm handlebars
Here is a 20s6p 21700 cell holder designed for the Ninebot G30. V1 460mm (L) x 117mm (W) x 23mm (H) V2 460mm (L) x 117mm (W) x 13mm (H) making it an ideal fit between the two weld seams in the frame. It also provides sufficient space on…
AJED Rear Axle Brake Bracket for Ninebot MAX G30 This bracket is to mount a rear brake system + increasing the maximum torque transmission (It acts like a huge torque washer) Please use maximum 2mm washers on the inside, otherwise a 125mm…
I made this bracket is to be mounted on the steering column on my Segway Ninebot Kickscooter MAX G30D II (Please note that im on a beginner level, when it comes to designing parts in fusion 360) Its a tight fit around the steering colom,…
ABS 0,2mm Tisknout položené stranou pro lepší pevnost jako na obrázku 2. Print put from side for better fortress (like pic. 2)
Level up your room.
Safety for the Ninebot folder mechanism. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 20 Notes: I used archimedean chords infill to have more flexibility.
i made my own rear fender for the Monorim rear suspension, the one they supply is a 2 part fender that is just horrible in my opinion. I broke min within 1 week, so i designs my own. when you print is you need to slice it in half and if…
Ninebot G30 Stealth Spacer Here we offer a few free spacers which can be 3D printed by everyone. Please note the license agreements before downloading or using these files. These spacers are NOT compatible with our aluminum floor system.…
Case used: https://de.aliexpress.com/item/1005009165100557.html?spm=a2g0o.order_list.order_list_main.40.30d95c5fX0qWQt&gatewayAdapt=glo2deu
Kickstand-shoe for Segway Ninebot F3/F3Pro/MaxG3 for better stand and stabilisation of the original-delivered Kickstand. Material must be TPU!! With this part you elevate the angle of the Escooter in the stand-postion for about 4 degrees.…
Print with at least 40% cubic infill Fits in and replaces the original fender
⚔ Virelda, the Stonebound Warden Medium humanoid (human), lawful neutral Armor Class 20 (Stonebound Plate) Hit Points 178 (21d8 + 84) Speed 30 ft. STR DEX CON INT WIS CHA 20 (+5) 14 (+2) 18 (+4) 12 (+1) 16 (+3) 13 (+1) 🛡 Saving Throws…
The plastic hook on my Ninebot ES4 had cracked and broken off a few times too many, so I designed and printed a replacement. You will need two socket head screws M4x16mm. My personal hook is printed in 17-4PH Stainless Steel on a…
Print duration: 3h 9m Material consuption: 24.64g / 8.26m Rafts: Optional Supports: Yes Resolution: 0.2 Infill: 15-20% Filament brand: Any Filament color: Any Filament material: Any ---- držák (holder) Print duration: 2h 45m Material…
Moving the taillight. a closed mud wing.
jednoduchý držák, tisk bez výplně, pouze perimetrie
In FPV (First Person View) drone flying, the application of positioning technology has become increasingly important. Positioning technology not only reduces the likelihood of losing the drone but also provides a stable flying experience…
Floorextension 20mm
The thing that this thing is based off is so flimsy! I accidentally dropped my e-bike and it broke off. So I started to look for replacement parts. I know this thing can be found easily on Alliexpress on the cheap but my problem is it…
Mounted with M3x5 screws + nuts
DISCLAIMER: I DO NOT ENCORUAGE STEALING OR (AND) THE USE OF THIS MODEL IN ILLEGAL WAYS, IT IS CREATED FOR RIGHTFULL OWNERS OF NINEBOT SNSC SCOOTERS THAT HAVE BEEN OFFICIALLY BOUGHT. Ninebot SNSC battery latch release key, features 2…
This is a GPS holder for the GEPRC cinebot30. The mount fits 22x22mm GPS. The GEPRC M8 and M10 have this size, and I know some other popular brands have the same size. v2 is the original model from Riley Gibson…
optimized for 0,2 FDM use less for Painting HAVE FUN PLEASE SEE THE OTHER STUFF
Věšák na ručníky a další menší prádlo. Věšák se zahákne za topný žebřík. Dva modely k dispozici - krátký, ten je v první řadě ručníků. Pokud na žebříku není dost místa, vytiskněte druhou, delší verzi, a vytvoříte tak druhou řadu věšáků na…
Archive of all Ninebot G2 Scans
small video preview gland TC 16х30х4,5 example: https://ozon.by/product/manzheta-armirovannaya-salnik-tc-16h30h4-5-1281241717/?__rr=1 https://youtube.com/shorts/HhOks5Je0Po Category: 3D Printing
Numberplate holder, needed in certain countries together with JREV Rear Fender
Vhorlath Realms – Season I The Ossuary Golem, Bonebound Colossus is an Undead dark fantasy 3D printable STL miniature depicting a hulking construct forged from death itself. Built from layered bones, grave remains, and necromantic power,…
Complete collection of G30 scans
A clip with which you can lock the brake during transport by public transport or in the car. Through the hole you can thread a cord to attach it to the scooter. I have printed in PetG with 4 walls and in the orientation as in the last…
This is my original design for an Ultimate Guard Boulder style deck box that prints in two parts and snaps together. Meant to be economic in filament use and strong enough to hold securely. The print profile provided includes a brim to…
Nástavec pro přímou brusku Attachment for straight grinder
I am using Orca slicer! to split the model press->right klick->Split->to objects for custom cable outputs write me a dm on Telgram @Florian2OO7 join our Telegram: https://t.me/ceppchat
I have not printed it yet so please share your thoughts or experiences.
JREV Floor Extension for 16S6P configs
Pokud stahujete prosím o like. Děkuji CZ: Toto jsou stohovatelné šuplíky - původně navržené pod polici, v rozích je místo na 3mm závitovou tyč pro zvýšení nostnosti a jako spojovací prvek pokud by jste je chtěli skládat na sebe - z tohoto…
Fits original as well as aftermarket fender (I have bought mine locally on Allegro ) Printing Supports required for axle mounts Print on the flat side Use a lot of perimeters
Box with drawers mainly for electronic through-hole components like resistors, but can be used for other stuff. Main difference from other models here: space and filament efficient (designed exactly for my needs) drawers have safety stops…
Equipped with a caliper and a little bit of sensible guessing I tried to be as close as possible to the original part.
When the Segway ES2 has a battery upgrade (ES4), the balance point of the kickscooter are right at the bottom of the battery, making it hard to carry. This handle allow you to carry your segway when it is folded down. Update: Added a…
Benchy London phonebooth Additionnal testing : Bridges and retractions
Ninebot SNSC 2.3/2.4 Controller Adapter for G30 Controller
This is a fully functional reproduction of the Tyco Trucking US-1 Phonebooth Action Accessory track. The track should be printed upside-down on a textured PEI sheet. Also, take care to get the height of the first layer dialed in before…
The holes are made for magnets(d=6mm)
Camera mount base for Cinebot30. Supports: Yes Infill: 100 Filament material: TPU
GEPRC Cinebot 30 GoPro mount with integrated mount for TBS M8.2 GPS module Remixed “Cam mount for GEPRC Cinebot 30 (Gopro 8 9 10 11 12 & DJI Action 2)” form Lenny B FPV The picture shows the part printed with Prusament PETG, 0.15mm, 100%…
Bumper / foot for Cinebot 30 Drone Category: Mechanical Toys
Tisk pet g, podpěry jsou potřeba pouzy na střed základny. Šrouby M6. Tisk kloubu doporučuji tisknout v malé výšce 0.10 nebo 0.15 kvůli tření. Je dobré kouli vybrousit brusným papírem.
This is a Remix of @pyrho's model with space for a Pineboard Hat Drive and a NVME with a heat sink. Raising the bottom part allows for a up to 6 mm high heat sink to passively cool the nvme. Print the bottom part, 4 standoffs and a top of…
Front Stem Light, for the JREV Light Environment
This handle allows you to more easily pull your scooter in its folded form rather than having to carry it. Its consists of two clamps that attach a bar/tube to your handlebar to be used as grip. The clamps are designed with 22mm diameter…
Small edit to the file which removes the weird tab thing in the middle. Was requested by somebody. I haven't printed this, but the person that requested it said that it prints well enough. Remix of https://www.thingiverse.com/thing:3927912
Keep your Samsung SmartTag 2 hidden inside your Max G3 scooter. Fast and easy print that slides into the top of the stem. Just remove the four screws underneath handlebars and slide the print into the hole. The SmartTag should be friction…
Tisknout na stojato s límcem.
Stojánek na pohlednici, foto nebo pozvánku
Wall mount base for the Moon lamp from Kx. Locking mechanism and light bulb socket mount is basically same as the original one for E27 light bulbs. Bottom part of the base is hollow with space for wires coming from the wall. To secure the…
Just unscrew the four screws holding the handlebar in the stem and insert the AirTag holder (Incl. the AirTag) in to the stem. The model considers space to run the wire next to the holder. I used a wire wrap to secure the wire with the…
a simple cup holder for my e3 scooter, should fit any vertical post with a 2.25" diameter. sized to fit regular cans for ummmm...soda.... on the go, or smaller tall cans like red bulls or those ice drinks. attaches with zip ties through…
Quick replacement for the turn-signal button of my Max G2. Print in TPU Needs glue Category: Other
setaví se nacvaknutím vrtule na její tělo
Держатель фары Arctic (может быть подойдёт и для фары Сова). Советую печатать с 100% заполнением. Вам понадобятся 2 винта M5x25mm (DIN 912) для крепления самого держателя. А так же 1 винт M6x45mm (DIN 912) . Ну и разумеется гайки к ним. Я…
This adapter lets you mount the Klickfix holder to a Ninebot G30D II scooter. It might also fit to other variants of the G30. Please leave a comment if you've tried it. Parts needed 4x M5x50 screws 4x M5 self-locking nuts Assembly Drill…
Complete OneBox V-Core 3 mod files Mod and all files fully compatible with both V-Core 3 and 3.1 upgrade. Both STL and STEP files also included. Update, It should be noted that Rat Rig have now followed this design with their 2.0…
