6 Inch Rack Blank 2U
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2u blank for 6 inch rack system.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a 2u rack blank for mounting a power supply adapter.
I simply took the awesome 1u design, duplicated and attached at the long seam.
Thanks to the original author (Maurício Pessoa).
https://www.printables.com/model/1173696-3d-printable-rack-10-inch-and-6-inch
Here is the rocker switch module I used:
https://www.amazon.com/dp/B07RQV2NPN
I used a dremel to outline the hole for the module; then used a small drill for the two mounting holes. I then used M2 screws and nuts to attach the module.
The purpose of this is to keep all wiring inside the rack. All three power adapters (switch, 2 pi's) will plug into a 3-outlet strip hidden in the rack. This strip is then wired to the adapter module.