6 Inch Rack Blank 2U
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2u blank for 6 inch rack system.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 123
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a 2u rack blank for mounting a power supply adapter.
I simply took the awesome 1u design, duplicated and attached at the long seam.
Thanks to the original author (Maurício Pessoa).
https://www.printables.com/model/1173696-3d-printable-rack-10-inch-and-6-inch
Here is the rocker switch module I used:
https://www.amazon.com/dp/B07RQV2NPN
I used a dremel to outline the hole for the module; then used a small drill for the two mounting holes. I then used M2 screws and nuts to attach the module.
The purpose of this is to keep all wiring inside the rack. All three power adapters (switch, 2 pi's) will plug into a 3-outlet strip hidden in the rack. This strip is then wired to the adapter module.