1 / 5
Filament holder for IKEA Skadis./ Uchwyt na filament do IKEA Skadis — zdjęcie 1
1 / 5

Filament holder for IKEA Skadis./ Uchwyt na filament do IKEA Skadis

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Filament holder for IKEA Skadis./ Uchwyt na filament do IKEA Skadis

Ocena
0 / 5
Polubienia
16
Pobrania
31
Wydruki
0
Wyświetlenia
330
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

You need a filament holder that you can easily mount on an IKEA Skadis board. This solution provides you with easy-to-print assembly elements; the only thing you need to buy are standard bearings so that the spool can rotate easily. For one spool, you need 2 rollers. The left roller holder and its mirror image (you can do this in the slicing program). If you want more rollers, you also need to print the middle holder and pegs that you will attach to the holder. There are no limits to the number of rollers.

Potrzebujesz uchwyt na filament, który łatwo zamontujesz na płycie IKEA Skadis. To rozwiązanie zapewnia Tobie łatwe elementy do wydrukowania zmontowania jedyne, co musisz kupić to standardowe łożyska, aby rolka z łatwością się obracała. Na jedną szpule potrzebujesz 2 rolki. Uchwyt rolki lewy oraz jego odbicie lustrzane (zrobisz to w programie do cięcia). Jeżeli chcesz więcej rolek dodatkowo musisz wydrukować uchwyt środkowy i kolki które zamocujesz w uchwycie. Nie masz ograniczeń w liczbie rolek.

Tagi