Inductive Qi charger Opel Corsa F
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my simpler Version for an inductive Charging Station for the Corsa F
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 708
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since my Corsa has already the ability to connect to android car, i only needed a charging station. And I don't want to build a charger, so i've bought an anker 313 charging pad for 9€. I've filled the hole base and cut out only the space for an anker 313 inductive charger pad. I made enough space to fit the USB through. I Printet the first Layer with TPU for a bit more grip, the rest out of PLA, since the station is almost complete in the shadow in the car it should be fine - but if you want to be safe print it with high temperatur material
For the Lid v2 you will need Support
For v4 no Support is needed, i've added a hole for easy loading and better heat transfer, i also removed the side for the phone, because mine is too big to fit and i've added a gap to get a better grip for removing the phone