Liczymy pasujące modele…
Update 10.02.2023: I remixed the rotor with the toroidal design :) Feel free to test ist out! https://www.printables.com/model/394700-toroidal-rotor-4-strong-flying-propeller In addition, there are now many other great remixed propellers…
I've always remembered this toy from my childhood, but flimsier and easier to lose, so I made this sturdier, compacter, more fun version.
Just a toroid propeller used as a decoration on the table. No mounting holes, so not usable for propeller things, just to collect dust :D Printed with tree supports, maybe it is possible without supports, but I was too scarry 😃
Just a simple cupholder I designed for a classic Opel GT (1968-1972). I put this together as an exercise to see if I was capable of modeling a functional car part. turned out pretty good and fits the interior well. print in PETG or ASA so…
PropBench V2 – 3D Printed FPV Prop Test Bench PropBench V2 is a compact 3D-printable test stand for benchmarking tiny FPV propellers with repeatable, automated test routines. It was built to solve a simple problem: hand-testing props is…
Detailed keychain inspired by a classic Opel front grille – perfect for car enthusiasts and fans of iconic automotive design. The model combines compact size with recognizable details and is optimized for easy 3D printing. 🔹 Clean,…
I understand that the Zero had a 3-bladed propeller, but for the wall art lines I prefer the look of a spinning prop
I removed the split compartment in the front and the hole for the USB cable. I have my wifi dongle for the Android car in the arm rest, hence my USB is used anyways and I don't need to feed the cable through and I have the option of…
Ich vbrauchte für unseren Opel Rocks E einen Innenspiegel. Diesen habe ich bei Amazon gefunden. Der originale Halter des Spiegels sagte mir nicht so zu, da man ihn hätte Schrauben oder Kleben müssen. Also einen neuen konstruiert. Infill:…
Upgrade to our underwater drone from our final video (link) on the mine exploration mission.
Just a toroid propeller used as a decoration on the table. No mounting holes, so not usable for propeller things, just to collect dust :D Printed with tree supports, maybe it is possible without supports, but I was too scarry 😃
FPV dron 5" propellers box (for 4 props) ver1, ver2. One box with chamfer and second without chamfer. Printed in PLA. Ver. 1 tested on: -Gemfan Hurricane MCK 51466 V2 -IFlight Nazgul F5 -T-Motor T-5143S Ver. 2 tested on: -T-Motor T-5146…
This ceiling light clip is originnaly a metal part which often causes short circuits in the car so i made a new one . I used ABS avec printed it vertically. You can stick some aluminium tape in it to reflect the light
A simple finger safe guard for the square drive side of the launcher. Now I can trust my child wont get their fingers pinched. Solidworks model included so you can modify if you'd like.
This adapter allows for a ½" square ratchet drive to be placed in one end, and drive the gearbox for the ultimate propeller launcher on the other side. Output speeds can be ridiculously fast if you use a drill or impact driver, use at…
This is a folding propeller I created years ago. I flew this propeller myself on upscaled (130%) versions of the Nucking Futs printable pylon racer. Link to Airplane: https://www.thingiverse.com/thing:3358880 Please give credit to the…
This 3D printable toy propeller is designed for easy assembly and hours of fun. The lightweight, durable design ensures that it spins smoothly with just a gentle push, making it a great interactive toy for children or a fun prop for…
ENGLISH: Holder for the Engelmann mirrors. These were also sold by Opel for the Manta or the Kadett. The holders break over the years. Likewise, extensions for these mirrors can still be found here if the installation position on the…
A six-bladed propeller with a hole on both sides for mounting the DC motor. It can be used as a propeller or as a cooling fan. Later I will make a whole cooler for it, and I will also make a collection for a better overview.
Hey , ich habe das neue Opel logo als Schlüsselanhänger gemacht. Hey, I made the new Opel logo as a key ring.
During transport and handling, the propeller blades of the BlueRobotics BlueBoat are exposed and prone to bumping with other objects. The Propeller Blades Protector provide a hard cover/shield for the blades thereby reducing risk of…
Opel Lightning Bolt in a Kia sized badge. Files are sized for a 2014 Kia Optima hood badge. Resize to fit your needs based on the height.
This detailed 3D model features the iconic Opel Manta in a sporty drift-tuned style, complete with wide fenders, aggressive body kit, and dual exhaust pipes. Perfect for car and tuning enthusiasts! Ideal as a decorative piece,…
Find 3D-Printed RC cars here.
Find 3D-Printed RC cars here.
GM/Opel Vectra B - Rear Door - Adapter for loudspeakers
90mm EDF 12blade Propeller. I recommend printing it from stronger filaments like : PETG , Nilon , Carbon reinforced nilon ... Category: Other
imported to fusion and made to be flat on the bed and not need unneccessary supports.
Basic Description A 3-propeller fan is a type of fan with three blades (propellers) driven by an electric motor to generate airflow. It is one of the most common fan designs used in household and industrial applications. 🔹 Design Elements…
Attention à ne pas coller les chenilles penchées vers l'extérieur.
These are two models for clockwise and counterclockwise propellers to be used with a 2 blade hub of an 4.8" propeller.
Developed with an airfoil structure, the connection between the center and the wings is reinforced and strengthened. Specifically designed for use in rubber-powered aircraft, the shaft housing in the center prevents free rotation of the…
A work in progress modular mounting system for Opel (Vauxhall) Astra H. This mounting system features modular design, so you can create your own things that you want to mount - cupholders, phone holders and so on. In my case I wanted a…
Design intention This remix is just a hex mesh to the original design and slightly bigger slots to fit an elastic. My print is in TPU for environmental durability, flexibility and layer adhesion so the slots won't break as easily. Looking…
Assembly requires Three M2 screws and nuts required ( 2 x 6mm and 1 x 8mm) if you would like them removable. Alternatively, use a toothpick as a ‘temporary positioning screw’ and glue in place. I recommend placing the nuts on Side B and…
Use 2x M3 x 30mm SHCS and M3 nuts Hole spacing is 21.5mm, this worked for my prop spinner but may need to be adjusted for others. Fusion file is included for easy remixing.
Simple gear for this shaft. 61 teeth Module 0.4 Commonly used in RC motors. It’s a fairly generic gear, but I’ve included the only reference name I could find for the model as a guide. Hope you find it useful!
Replacement propeller for the Grizzly Battery Leaf Vacuum - ALS 4025. Printed on a Prusa MKS3+ using Prusament PETG Carbon Fiber material. To increase durability, I increased the number of perimeters to 4 and the infill to 30%. Supports…
3D printable topographic miniature of Stephanopel - 🇩🇪 Germany Capture the beauty of Stephanopel 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 51.347, 7.794…
A small toy helicopter that has propellers that can spin. Feel free to scale it up or down as you like.
Supporting points are motor housing and inside of the hole where propeller fixing nut is located. Might work with other Torqeedo models as well, but I have no idea what the dimensions are for those. Propellers cone shape is another…
Shim to fit between new type Flipsky 6384 waterproof motor and foil drive propeller hub
I made a tiny propeller for Lukas Hannert's high-speed propeller launcher found here https://makerworld.com/en/models/628601-high-speed-propeller-launcher?from=search#profileId-553231 . I made the small version of his launcher(available…
As a pilot, I find the workings of aircraft mechanics extremely fascinating, which is why I am so enthusiastic about Chris B's variable pitch propeller mechanism and wanted a model with longer blades, so I built one myself. Therefore…
Eines der Gummiteile an der Hutablage meines Vectra C's Fließhecks fehlte, also habe ich nach Vorbild des Originals eins nachmodelliert, dass aber Druckoptimiert ist. Es wird aus TPU gedruckt und sorgt dafür, dass die Hutablage während…
Part is not possible to find and buy original, made this according to scheme and dimensions that fit. Problems shifting.
THESE HAVE NOT BEEN FLOWN YET. PROTOTYPE DESIGN NEEDING REFINEMENT! AND ALMOST FOOLISH TO TRY BUT THAT'S NOT STOPPING ME. PROCEED ACCORDINGLY. ON THE MODEL THESE WERE DESIGNED FOR, THE ENGINES ARE COUNTERROTATING. THE LEFT MOTOR SPINS…
Po vložení koše do přihrádky stále zůstavá funkčí jedno místo pro odložení nápoje. Nad vložený odpadkový koš lze zasunout opěrka ruky. 0.28mm layer, 4 walls, 15% infill Tisk - 2hodiny - 141g materiálu
PropBench V2 – 3D Printed FPV Prop Test Bench PropBench V2 is a compact 3D-printable test stand for benchmarking tiny FPV propellers with repeatable, automated test routines. It was built to solve a simple problem: hand-testing props is…
Stencil to align the crankshaft when doing the timing belt. Amazon tools accuracy was awful so I did my own.
There are two variants of the JX-75, early and late. This is a replacement propulsion drive pulley for the early series machine, JD part number AM107567. 3-1/2" outer diameter, 10mm shaft, 3mm key. (The newer version uses a 4" drive…
this is a propeller i made with a 3.17 mm fitted bore diameter so i could put it on my rc moter NOTE : careful when using 3s lipo/12v or higher battery's as the high rpm ay result in the explosion and may result in you getting hurt from…
this is (lookin from behind and top) rear right leg bottom engine cover/stand. mirror it and you have also left side.
Wird benötigt um bei laufendem Motor das Ventilspiel einzustellen. OPEL Abdeckkappe Steuerkette Opel CiH Motor Abdeckung 1,6 1,9 2,0 2,2 2,4 3,0
The Ultimate Cup Holder Upgrade for Opel Vectra C! Unlike most standard inserts that only fit small cans, this custom-designed organizer is built to securely hold BOTH 0.33L and 0.5L cans . Perfect for energy drinks, soda, or standard…
Hello! I've made this simple double cupholder design for Opel Corsa C 2006. whole point is that original cupholder is not deep enough and every drink i put in it falls over and spills, so i made this cupholder design with walls high…
Detailed keychain inspired by a classic Opel front grille – perfect for car enthusiasts and fans of iconic automotive design. The model combines compact size with recognizable details and is optimized for easy 3D printing. 🔹 Clean,…
Print it with the front side facing down and with support. Two versions are possible: classical support to break away after print for an indented logo solid support with 0 mm z-distance which leaves just a small notch around the logo The…
Print recommendations : Material : PETG Layer height : 0,2mm Brims : 5mm Perimeters : 2 infill : 15% Note : Let me know if you notice any modification that could help!
This is a front speaker (both sides) adapter for aftermarket Opel Calibra speakers, which have to be 165mm. You can just screw in the speakers to the adapter. I printed in PLA and it still holds up well after about 6 months. Category:…
Opel Calibra Radiator Hose Clip Use ABS or ASA for this, because PLA will deform! Category: Automotive
This model is compatible with the lego system.
These are airvents that go inside an opel blitz (1970's). for a 45 mm and 55 mm hose.
Just a simple cupholder I designed for a classic Opel GT (1968-1972). I put this together as an exercise to see if I was capable of modeling a functional car part. turned out pretty good and fits the interior well. print in PETG or ASA so…
~4g each, you can fit six of these on the Bambu X1C build plate, takes an hour and 15. Which is good, because they get lost like nobody's business.
The Bike Propeller: A super portable and mountable propeller for you bicycle to make it feel like an airplane! Completely powered by air going into the propeller. The slowest you have to go to make it spin at a medium pace is 4 mph,…
Layer height: 0,15mm no infill PLA/PETG (doesn't matter) Check 3mf project file for cool settings
I made this to hold my 2016 Vauxhall Astra keyfob because both of my keys keyring holder had snapped off, it probably fits other makes/models being GM. It's bulky but a much cheaper option than buying a new key fob. You need to really…
Another propeller I made in AutoCAD, based off a cube and then just filleted LOADS. Also haven't printed this one out yet, but I'll upload photos when I do.
I remixed the leg protector from Trulala69 to make it a propeller guard. I recommend to print it with the guard laying on the table (as shown in the picture or upside down from the 3D display above) and the leg protector on the "air"…
I have made this Modular Propeller Guard to replace the ones that originally came with the HEYGELO Sirius S90 drone. With this new model, the protection area is larger and its resistance is higher. It is easy to assemble and is tight…
Helix and Spiral feature has many applications but few people know that it is applicable for designing propellers too. Hope that helps you to improve your design skill. Link to the Tutorial: https://www.youtube.com/watch?v=r35-IOg6l8w
A single cup holder based on SlvrSky1984's design for us Euro Opel GT owners, including a 250ml insert. Category: Automotive
PLEASE NOTE THIS IS DESIGNED FOR PRINTING IN TPU so that it can be thumped on its head without breaking it. The cap is a good snug fit on the delivery tip, I haven't tried it in PLA. I used 0.4mm nozzle, 0.4mm line width, 0.2mm layers, no…
DJI AVATA 2 Props Guard box It fits DJI Avata 2 propellers case, useable for me and I hope for you too __________________ If you add this to your collection or download it, please click the LIKE . You can earn some Prusameters if you'll…
A sturdy sliding case that can store a pair of Tero propellers and a removal tool.
Even when I lock the car from the inside, the inner lock of the trunk can open the trunk door. I was afraid my dogs could accidentally open it, so I printed this safety plug to make it impossible to unlock the trunk from the inside…
This Opel logo is designed for automotive enthusiasts and hobbyists looking to enhance their vehicles or collections with a sleek and modern symbol. It can be used for 3D printing to create keychains, car accessories, or even wall art.…
This Opel Vectra Badge is designed for automotive enthusiasts and hobbyists looking to enhance their vehicles or collections with a sleek and modern symbol. It can be used for 3D printing to create keychains, car accessories, or even wall…
This Opel Astra Badge is designed for automotive enthusiasts and hobbyists looking to enhance their vehicles or collections with a sleek and modern symbol. It can be used for 3D printing to create keychains, car accessories, or even wall…
The original with @frankm10_33400 modified gear and pulling rod and a bigger toroidal based on @MeisterEdel 's design.
