Manta Ray Voronoi
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A manta ray in voronoi style.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 102
- Wydruki
- 1
- Wyświetlenia
- 445
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
Printing Information:
Use tree support to support the voronoi structure.
Use a brim, since its contact surface with the printbed isn't all that much.
Print the model at 45° (in X: tail down, head up) to have an easier time removing the supports after printing
Thanks to @Ryan_1788814 on printables for the suggestion.
Thanks to @Furtim on makerworld for the 45° orientation suggestion.
Note that I had to comply with the license of the base model and that the license of this model is therefore also non-commercial. Would I have had the choice, only attribution would be required. This also means that, would you have commercial permission from the base author, you can use this one as well with no extra steps.
---
Erratum (02/01/26): New Bambu Lab 3mf with 45° angle orientation