Remington Express 11mm Dovetail Rail Rear Sight Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
11mm Dovetail rail replacement for the Remington Express air rifle's rear sight. Uses the existing holes in the…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 1264
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
11mm Dovetail rail replacement for the Remington Express air rifle's rear sight. Uses the existing holes in the receiver that the sight originally mounted with. The many holes in the mount are for scope stop pins, which are on a lot of scope mounts.
Remix of my previous Picatinny design. I wanted to try a pistol scope with a one piece mount I had.
As with the previous design, you should be able to reuse the original sight screws (though you'll still need one), and one more (M3x7 - M3x10). It's worth noting that the original M3 screwheads are a bit weak and might strip if you aren't careful.
One problem with break barrel air rifles (and other break actions in general) is that the barrel will always lock in a slightly different position. As such, the point of impact may be different between each projectile fired when using a scope mounted on the receiver. This isn't a big problem on every break barrel airgun, but I found the variance shooting the Remington Express could be quite annoying. With something like a zero parallax reflex sight or airgun rated pistol scope, it could be useful.
Overall this design isn't as good as the picatinny design. It has to be longer, and therefore is much more wobbly than the previous design.
Print Settings
Rafts:
No
Supports:
No
0.2mm
Infill:
40%
Filament:
eSun PLA+ Black
Category: Sport & Outdoors