HW40/P17 Suppressor Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Silencer adaptor for use with Weihrauch HW40/Beeman P17. Fits 1/2-20 UNF threaded moderators. Held in by friction.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 272
- Wydruki
- 1
- Wyświetlenia
- 2585
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Silencer adaptor for use with Weihrauch HW40/Beeman P17.
Fits 1/2-20 UNF threaded moderators.
Held in by friction.
The options to use a suppressor with the HW40 were limited. This works pretty well. Only issue is that when attached, a silencer is too wide to allow the pistol to open fully, meaning it must be removed and reattached to load the airgun. As it's only held in with friction, it can be pulled out, loaded, and put back in.
When printing, print it on it's side - rotate the mesh 90 degrees in Cura. It snaps in half really easily if you print it pointing up.
The part that inserts into the muzzle break is 18mm long with 10mm diameter, which may mean it can be used in other airguns.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
0.12
Infill:
40%
Filament:
eSun PLA+ Black
Notes:
Print horizontally - flip it 90 degrees in Cura.
Category: Sport & Outdoors