1 / 2
Gridfinity FujiFilm X-H1 Module With space for 3 Batteries
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is a Gridfinity Module that takes 3 batterys and one X-H1 Camera and allows you to store them neatly
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Printing Instructions
Filiment
| Material Advised | PLA |
Material Propaties Required
| Constancy | Hard |
| Durablity | Not brittle but doesnt need to be up to much |
| Sun Bleaching Protection | Not required if used in a draw if using in direct sunlight use PETG or ABS |
Slicing
| Print Direction | Vertical |
| Infill | 5% |
| Supports | Not Required |
Overview
This is yet another Gridfinty module and as a result i used the Fusion 360 Plugin Gridfinity Generator to create the Box
When it came to the camera then callipers and the camera itself were used to devolp the outline the batterys were added to fill the extra space left at the back needed to make space for the viewfinder to prevent interferance with other modules.