Gridfinity FujiFilm X-H1 Module With space for 3 Batteries
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€5.24 – €6.40 net (excluding VAT)
For file: FujiFilm XH1 Gridfinty Module v4_0.4n_0.2mm_PLA_XLIS_3h40m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.82 excluding VAT (range midpoint).
- Weight reported by the author
- 126 g
- Print time reported by the author
- 3.67 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
this is a Gridfinity Module that takes 3 batterys and one X-H1 Camera and allows you to store them neatly
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 27
- Makes
- 0
- Views
- 175
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Printing Instructions
Filiment
| Material Advised | PLA |
Material Propaties Required
| Constancy | Hard |
| Durablity | Not brittle but doesnt need to be up to much |
| Sun Bleaching Protection | Not required if used in a draw if using in direct sunlight use PETG or ABS |
Slicing
| Print Direction | Vertical |
| Infill | 5% |
| Supports | Not Required |
Overview
This is yet another Gridfinty module and as a result i used the Fusion 360 Plugin Gridfinity Generator to create the Box
When it came to the camera then callipers and the camera itself were used to devolp the outline the batterys were added to fill the extra space left at the back needed to make space for the viewfinder to prevent interferance with other modules.