Prusa Core One xLCD holder for top right frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I want the xLCD not on front buttom side, so I decide to develop a holder for the top right frame part
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 366
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Core One delivered yesterday and today printer was build.
I want the xLCD not on front buttom side, so I decide to develop a holder for the top right side part.
Add V4: Version with 2 screws mount to the frame. More stable version.
Remove one Nylon rivet from the right acrylic plate, glue 5 or more 20x6x2 magnets inside the printed part and screw this with a M3x12 screw and nut inside the red marked place (see picture).
Also not clear if the xLCD ribbon cable in long enough, perhaps I need a extension (not a problem).
Ribbon cable was OK if the middle hole was used and the cable routed directly from the Buddy Board to the right side.