1 / 3
Boxing Glove Voronoi
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A boxing glove in voronoi style easily printable in two colors
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 235
- Wydruki
- 1
- Wyświetlenia
- 690
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (1)Kolekcje (37)Powiązane
Printing Information:
- If you have an MMU, you can split the model to its pieces and use two different filaments for both pieces (no purge tower needed). Otherwise, you can achieve the same results by changing your filament during the print.
- Use tree support to support the voronoi structure.
- Use a brim, since its contact surface with the printbed isn't all that much.
In addition to the voronoi model I also added the intermediary step of the base model from wich I removed the hole.
Note that I had to comply with the license of the base model and that the license of this model is therefore also non-commercial. Would I have had the choice, only attribution would be required. This also means that, would you have commercial permission from the base author, you can use this one as well with no extra steps.