1 / 3
Boxing Glove Voronoi
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A boxing glove in voronoi style easily printable in two colors
- Rating
- 5 / 5
- Likes
- 35
- Downloads
- 235
- Makes
- 1
- Views
- 690
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printing Information:
- If you have an MMU, you can split the model to its pieces and use two different filaments for both pieces (no purge tower needed). Otherwise, you can achieve the same results by changing your filament during the print.
- Use tree support to support the voronoi structure.
- Use a brim, since its contact surface with the printbed isn't all that much.
In addition to the voronoi model I also added the intermediary step of the base model from wich I removed the hole.
Note that I had to comply with the license of the base model and that the license of this model is therefore also non-commercial. Would I have had the choice, only attribution would be required. This also means that, would you have commercial permission from the base author, you can use this one as well with no extra steps.