1 / 2
FRC 3038 2025 Robot 3D Printable and Game Pieces
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D printable 1:16 scale model of our 2025 robot, Cold Front with matching Algae and Coral!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
This is a 1:16 scale model of our 2025 robot, Cold Front! The robot is printed as a single part. Files for the two main Game Elements, Algae and Coral, are also included.
Material:
- Robot:
- Printed in Creality Blue PLA
- https://a.co/d/9gS543f
- Algae:
- Printed in ELEGOO Sea Green PLA
- https://a.co/d/hfTNPvs
- Coral:
- Printed in OVERTURE White PLA
- https://a.co/d/fFCsDZH
Printing Orientation:
- Robot:
- Tipped forward (taller side) at a 30° angle (recommended for strength)
- Algae:
- Flat side down on build plate
- Coral:
- Standing on edge
Supports:
- Robot:
- Required
- The intake ramp (where “Cold Front” text is) requires additional support on the sides while printing, otherwise with will be knocked loose
- Algae:
- Yes
- Coral:
- None
Infill:
- All:
- 15% infill is recommended, but not necessary.
Other:
- Some bed adhesion may be needed depending on printer.
- If desired, the Algae and Coral can be glued in place. The Algae goes in the bumper cutout and the Coral goes at the top of the elevator