PrintAirPipe – 125mm Air Sensor Segment by Nerdiy.de
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With the PrintAirPipe Air Sensor Segment it is possible to measure various properties of the air within the pipe system.
- Ocena
- 0 / 5
- Polubienia
- 1
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Standard Digital File License
Using the PrintAirPipe – 125 Air Sensor Segment for the PrintAirPipe System, it is possible to measure various properties of the air within the pipe system.
For this purpose, a BME680, a BME280, and one of the available fermion gas sensors from DF-Robot can be installed inside.
The sensors can then be read using the SeeedStudio XIAO ESP32 S3 integrated in the sensor segment. Thanks to the firmware based on the ESPHome framework, the data can be easily forwarded to a smart home system or other device and processed accordingly.
This also allows for responses to specific values. For example, the supply air path could be shut off after detecting a certain change in air quality. The PrintAirPipe – ServoValve can be used for this purpose.
More information, including a material list, can be found on my blog: Nerdiy.de
Are you looking for other offers for the PrintAirPipe system?
You can find all available segments at Nerdiy.de/papp