Hand assembled keyboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ortholinear split keyboard 100% DIY Fully hand assembled Under 10€ Code provided in GitHub/EquaOps
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Refined version of my earlier keyboard draft.
Fully working model
100% Hand assembled and customizable
Supports default sized mechanical switches that are semi-swappable
Required for assembly:
3D printed parts
Soldering Iron, Tin and Flux (Dont even attempt without flux)
22-26 AWG wire, Important! Must be Single core!!! Atleast few meters!
Wire Stripper, Pliers or some tool to completely remove the rubber from the wire
33x Mechanical Switch, Compare to the switch type included in the 3D model
1x STM32F103C8T6 Development board aka “Bluepill” (Any port type but adjust the model)
Optional: Keycaps, 3D printed ones will do just fine aswell!
Not related to 3D model
Firmware can be found in GitHub/EquaOps
Made using STM32CubeIDE
Programmed using STM32CubeProgrammer
Used Arduino Uno as USB-UART adapter for programming
(Ask for a video, I plan on making complete tutorial on YouTube as my first ever video so positive requests will surely boost my confidence and motivation in making that!)