Portable Washing Machine Drain Hose Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have a portable washing machine that drains into a sink. My sink was too thick for the stock holder, so I made this!
- Ocena
- 4,875 / 5
- Polubienia
- 143
- Pobrania
- 1370
- Wydruki
- 7
- Wyświetlenia
- 4495
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My old drain hose holder that came with my washer was too narrow to actually hang on my sink. I designed this one to fit a countertop/sink combo that's up to 90mm wide. This can accommodate a 30mm hose, so it's wide enough to fit a common US 1-inch hose.
My drain hose is flexible, so I also added a retaining clip to slide into the grooves of the hose to keep it from sliding out. It's 1.5mm thick with a 19mm opening for the narrow portion of my hose. You may need to scale it to fit your specific application.
Printed with SUNLU orange PETG, .2mm layer height. I used 3 perimeters, no support needed. You could add some support to the groove that the hose sits in, but I wouldn't advise it-- it's a lot more material and printing time for something that won't be seen once you put the hose inside of it.