Portable Washing Machine Drain Hose Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I have a portable washing machine that drains into a sink. My sink was too thick for the stock holder, so I made this!
- Rating
- 4.875 / 5
- Likes
- 143
- Downloads
- 1,373
- Makes
- 7
- Views
- 4,517
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My old drain hose holder that came with my washer was too narrow to actually hang on my sink. I designed this one to fit a countertop/sink combo that's up to 90mm wide. This can accommodate a 30mm hose, so it's wide enough to fit a common US 1-inch hose.
My drain hose is flexible, so I also added a retaining clip to slide into the grooves of the hose to keep it from sliding out. It's 1.5mm thick with a 19mm opening for the narrow portion of my hose. You may need to scale it to fit your specific application.
Printed with SUNLU orange PETG, .2mm layer height. I used 3 perimeters, no support needed. You could add some support to the groove that the hose sits in, but I wouldn't advise it-- it's a lot more material and printing time for something that won't be seen once you put the hose inside of it.