Macro lens adapter Tooltop T256
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter for the Infrared camera Tooltop T256 with two round magnets 5x3 mm and ZnSe Focus Lens
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 1
- Wyświetlenia
- 237
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
As I haven't found any adapter for this infrared camera I made one myself.
You need ZnSe Focus Lens PVD 20mm x 101.6mm (or better 20mm x 50.8 mm) that is widely available on Aliexpress (I bought one as cheap as $5-6).
I uploaded also the step file if you have another lens or different magnets.
I didn't find big difference with that lens as maybe the original lens for this IR camera is close enough focus distance, maybe lens of 20mm with lower focal length will be better.
As seen from picture examples (before/after) - the pins of an IC are a bit more distinguishable.
The construction seems to be self explanatory. Print the base, put the lens inside and carefully fit the ring over the lens (use some plastic tool to push it). Magnets should be press fit.
Update: You can use also 20mmx50.8mm and you get even bigger magnification from 5 cm focal distance.