Liczymy pasujące modele…
Look at those two sample pictures! Wow! You can now give any Nikon F-mount lenses or adapters a super macro super power! UPDATE: Added a new retention ring for lens-side mounting. No tools or rubber bands needed! Just snap it onto any…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena jednego wariantu
Features: Designed for Cherry MX compatible switches. LED Window to leverage the built-in RP2040 neopixel RGB LED. No screws! Mechanical peg holders for the RP2040. Snap cover. USB port access hole on the back of the macropad. 11 keys…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This adapter can be used in conjuction with a reverse lens adapter and a bellow or macro tubes to attach a RMS mount microscope lens to a digital camera.
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Github now: Sovol SV08 - Optimized G-Code / Macro.cfg / printer.cfg and highspeed settings PETG Further releases and instructions on GITHUB: https://github.com/kampfwuffi/Sovol-SV08-Optimized-Macros HOW HARD IS IT TO IMPLEMENT? Basically…
A little handwired macropad that you can take anywhere! Includes a rotary encoder slot perfect for volume control, page scrolling, and more. Note: EC11 rotary encoder is free floating therefore you may want to glue your encoder in or…
Canon RF 35mm f/1.8 Macro IS STM Lens Hood. Two styles. Full and tulip. • Snaps on and holds tight. • Reversible so you can store backwards on lens. • Access tabs on either side in case you need help removing. I suggest using a soft…
I needed simple and lightweight diffuser for macro photography. I was unable to find suitable diffuser for my Godox v860III flash so i created my own. I have 2 macro lenses: Laowa 100mm and Canon 100mm and this diffuser works well with…
I tried this adapter ( https://www.printables.com/de/model/451842-mftmicro-four-thirds-to-m42-adapter ) first, but it wobbled, the flange focal distance was completely wrong, you could easily overtighten it and the aperture pin was not…
I created this slider for macro photography. It uses widely available 3D printing hardware for the most part, and it's fully open source! You can see the design workflow and the slider in action here: The best part of using a 2020…
I needed simple and lightweight diffuser for macro photography. I was unable to find suitable diffuser for my Godox v350 flash so i created my own. I have 2 macro lenses: Laowa 100mm and Canon 100mm and this diffuser works well with both…
Remix of Bento Mechanical Keyboard Macropad on thingiverse resized for Pi Pico www.thingiverse.com/thing:4416966
The full Macrotrack Oval Speedway spans (approx.) 132 cm [4.3 ft] in width and 89cm [2.9 ft] in depth - featuring a 3 m [9.8 ft] long smooth, engineered track surface along with a press fit, numbered connection scheme that allows for easy…
This is a manually operated macro rail to assist with precise image capture for focus stacking in macro photography. The winding mechanism has a metric thread with a 1 mm pitch, so a full turn of the knob advances the camera by exactly…
Profiles for the Sovol Zero in OrcaSlicer, PrusaSlicer and SuperSlicer, generated from one source so all three slicers ask for the same speeds and accelerations. An optional Klipper macro pack adds bed boost for the chamber preheat, a…
[5/16/25] UPDATE: Full version now free for all. This post will be left up for now, but just go download it here: https://www.printables.com/model/1012395-macrotrack-oval-speedway-miniature The full Macrotrack Oval Speedway spans…
Inspired by @chardane on Twitter I set out to make some keycaps for the Adadfruit MacroPad that had excellent shine-through of the LEDs and also made as much of the plate PCB's artwork visible as possible. Unlike @chardane's design, the…
FR Modifications apportées aux fichier d'installation du RapidChange sur une Genmitsu en optimisant son volume de travail. Le fichier zip contient toutes les macros pour installer 4 fraises différentes. ATTENTION, certaines valeurs…
This is a 6 button keypad to put in an Altoids™ box. You need additional hardware (see below) and the Arduino IDE to program the MCU. Use sketch provided here. There you can alter the key assignment to your desire. (Sadly I forgot to…
Macro Keyboard powered by Arduino Pro Micro with printable relegendable keycaps. Buttons are a remix, I adjusted them to better fit my MX switches. Requirements: - 4x M3 x 16mm Screws (M3 x 18mm also works) - 12x MX Switches - 1x Arduino…
This is a case for the HIKMICRO Mini2 thermal camera, with a sliding 20mm macro lens holder. A 20mm ZnSe CO2 focus lens is needed for this project. I used a 38.1mm focal length. Printed in PLA, 0.10 layer height Instructions: Fit the…
Macropad with RP2040 and CircuitPython See HERE for a write-up on my website with pictures Most DIY macropads I could find on the internet were either too expensive or had too many features for my needs (knobs, displays, etc). My goals…
A little handwired macropad that you can take anywhere! Features 5 MX-style switches and one rotary encoder.
Video https://www.youtube.com/shorts/X6UwkqAMoZo ________________________________________________________________________________________________________ ENGLISH -------------- I wanted to create a simple system to be able to switch…
This print allows you to use a 4x microscope objective as a macro lens with a Nikon-Z mount camera. Based on the concept from this model , but designed not to use screws. I've been using the Nikon Z-fc. The cone, and the base of the model…
2 in 1 Macro Pad and Midi Controller, Tested With Mac/Windows Included: Print files, Code Code: Looks like shit but didn't feel like refactoring, since it worked, but after i see some trafic here i'll optimize and clean it. The midi keys…
Zigbee Macropad – 16-Key Wireless Controller for Home Assistant A compact 16-key Zigbee macropad powered by an ESP32-C6 , designed specifically for seamless integration with Home Assistant via Zigbee2MQTT . This macropad provides tactile…
Edited 03-05-2026 Testing Silicone Brush vs Brass Brush Just for fun and testing, I also mounted a silicone brush on the left side using a similar bracket design. I want to see if brass or silicone cleans certain materials better — brass…
A sleek and modern case for your Adafruit macropad. The 2-part design is easy to assemble and the case is sturdy thanks to the 4 M3x8 bolts. Dust cover included Print at 0.2mm layer height
Virtue Macro Pack for 2WD Virtu ###### Please post your Makes ###### Please like this, download and post the make if you built it It helps us makers with feedback and gets us some Prusa meters as most people don't pay it forward Feel free…
English: Bluetooth Macropad for Autodarts (12 Keys) Tired of walking back to your computer after every set? Elevate your game with this DIY 12-key Macropad , specifically designed for the Autodarts ecosystem. Key Features: True Wireless:…
This simple 3D print acts as a bumper around the Adafruit MacroPad's base PCB (the one with the Golden Record artwork on it). Print Settings Printer: Generic Rafts: No Supports: No Resolution: 200 Infill: 15% Filament: Any Flex Any…
ENGLISH ---------------- Vertical support for Uni-T UTi260B UTi690B UNi690B thermal imager. Optional: 8 magnets 5x1.8mm to improve the closing pressure of the lens storage compartment Print without supports, print the rods flat on the bed…
When printed in PLA+, surface/fitment quality is better. In the pictures it is printed in PET-CF for durability. Leg screw holes needs deburring from both sides, the fitment is press/forced at first and then by screwing in and out a bunch…
A simple base to raise the NLOFIN macropad. You can find the macropad here. This print requires 15mm rubber feet. No supports required!
The stand raises the front, bottom edge of the Type 9 by 40mm and tilts it forwards by 15° so that it can be placed behind another keyboard. Designed for the Type 9 Series III but may work with previous or future versions (untested).…
This is essentially a docking station for the nanoVNA-H4. When coupled with the tinyPFA firmware (which I have no association with), it becomes a pretty powerful (and cheap) Phase Frequency Analyzer. If you aren't familiar, PFAs allow you…
MacroKeyboard This is remixed from this beautifully designed MacroKeyboard (Stream Cheap https://www.partsnotincluded.com/diy-stream-deck-mini-macro-keyboard/ https://www.thingiverse.com/thing:2822140 ). I Loved the design but I wanted it…
Some may have one of these already or may be wanting to buy one of the kits. This is the case file if you were wanting to make your own. Original creator / Github: https://github.com/keyboard-magpie/isopad
This is a remix of the hand wired macropad VOID9 by Victor . Instead of the Arduino ProMicro this version fits a STM32F4x1 (aka "Black Pill"). I provide only the redesigned bottom part, please visit the original thing for the top pieces.…
a macropad kind of thingy which can change the volume on your pc using an potentiometer and uses 4 buttons for anything you like e.g. skip/pauze songs. Code using circuitpython with usbhid library installed. needed parts: 4x m2 6mm…
Previous models people have “drilled” into the case to run wires wherever they may. That seems unfinished to me and I do not want a loop of wires hanging out the side or wrapping around. -Supports 100% of the time ONLY for the OLED…
Logitech MX Mechanical Shortcut Caps / Physical Macro Overlays Transform your Logitech MX Mechanical keyboard with physical hardware shortcut caps! These 3D-printable overlays clip directly onto your existing keycaps, allowing you to…
Macro Diffuser designed for Olympus setup, you need some white opaque polypropylene (i use GBC PolyOpaque 0,3mm) as a diffuser material (just trace the shape of the diffuser and make some latches with a hole to attach it at the attachment…
🧠 ESP32 Smart MacroPad Case (3×3 + Encoder + IR + Lolin32) A flexible TPU enclosure for a smart 3×3 ESP32 multi-device MacroPad or remote. It supports a rotary encoder, IR transmitter/receiver, LED indicator, and optional sensors — all…
Custom MacroPad - Vol & Game Controller (Arduino Pro Micro) This is a custom MacroPad designed for gaming and productivity. The project uses an Arduino Pro Micro to emulate a USB HID keyboard/mouse, allowing you to control system volume,…
Wanting more even light with softer shadows for macro/micro work, this has been modified for years to get to this version. Right now, it only fits onto a Canon 300EZ flash/strobe unit because I haven't found a way to make it adjustable…
Some may have one of these already or may be wanting to buy one of the kits. This is the case file if you were wanting to make your own. Original creator / Github: https://github.com/keyboard-magpie/isopad
This design is based on the work by DaveM . I created a new design for the case that is heavily inspired by Dave's design but tailored to my tastes. The screws for the faceplate are now hidden and the case is more minimalistic. Photos…
This adapter can be used in conjuction with a reverse lens adapter and a bellow or macro tubes to attach a RMS mount microscope lens to a digital camera.
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
I made a switchplate for toby chuis amazing numpad design. helps with the positioning and alignment of cherry-like switches. https://github.com/tobychui/4xMacropad/tree/main/4x5Macro-Numpad It fits the screw holes of his numpad case, you…
This is a remix of the hand wired macropad VOID9 by Victor . Instead of the Arduino ProMicro this version fits a STM32F4x1 (aka "Black Pill"). I provide only the redesigned bottom part, please visit the original thing for the top pieces.…
This is the small project of mine. It is a macro keyboard . Power by Arduino Pro Micro . It has a OLED 0.96 128x64 display, encoder, 12 keys and RGB LEDs . I call it macroTrigger It is handy for pc macros if you work in programes like…
Assembly is very straight forward. You can follow this video if you don't know how to handwire a keyboard. Hot glue the switches and the encoder to the top plate and the pro micro to the bottom. I used this model for the knob (…
This is a 6 button keypad to put in an Altoids™ box. You need additional hardware (see below) and the Arduino IDE to program the MCU. Use sketch provided here. There you can alter the key assignment to your desire. (Sadly I forgot to…
tested using PLA, PLA+. Printed on Creality K1 .12 Layer height, Cutout is for a Type-C ProMicro 3 walls 35% infill (you can go as low as 15% and it will be solid, I printed one at 80% to add weight) Print the case as it comes, bottom…
The top cover comes in two styles: one is beveled at 45 degrees, and the other has a 6mm rounded chamfer. Parts: 1 Waveshare RP2040-Zero 7 Cherry MX Switches 7 Keycaps 4 M3x12 screw 4 M3x4x5 Brass Hot Melt Insert Knurled Nut 1 EC11 Rotary…
Zigbee Macropad – 16-Key Wireless Controller for Home Assistant A compact 16-key Zigbee macropad powered by an ESP32-C6 , designed specifically for seamless integration with Home Assistant via Zigbee2MQTT . This macropad provides tactile…
Laowa 90mm f2.8 lens hood designed for those who have lost theirs. Features: Uses the lens bayonet to mount. Uses friction to stay in place instead of a neat spring :( Does not interfere with filter threads or lens cap. Anti reflection…
This macropad case is designed for the Pro Micro (ATmega32U4) and supports three interchangeable variants : Variants included: • No knob (keys only) • Single rotary encoder • Dual rotary encoders All versions share the same 3×4 key layout…
This project is a custom 12-key macropad designed and built as an academic project. The enclosure and structural parts are 3D printed (FDM), while the keycaps were printed using SLA to achieve a higher-quality surface finish. The macropad…
Hardware needed : x4 12-14mm M2 screws to secure bottom plate x6 mechanical switches of your choice x1 RP2040-Zero microcontroller x1 8-bit RGB LED x4 10mm rubber pad 30AWG Wrapping Wire Solder iron Transparent Double Sided Polyester Tape…
Dmitry made a great model and supplied the Marco code for Klipper. I just made it work for the AI3M bed! For macro setup, look back at Dmitry post. Note: You may need to take off the bed to get it on. [gcode_macro WIPE] description: Wipe…
Custom MacroPad - Vol & Game Controller (Arduino Pro Micro) This is a custom MacroPad designed for gaming and productivity. The project uses an Arduino Pro Micro to emulate a USB HID keyboard/mouse, allowing you to control system volume,…
a macropad kind of thingy which can change the volume on your pc using an potentiometer and uses 4 buttons for anything you like e.g. skip/pauze songs. Code using circuitpython with usbhid library installed. needed parts: 4x m2 6mm…
English: Bluetooth Macropad for Autodarts (12 Keys) Tired of walking back to your computer after every set? Elevate your game with this DIY 12-key Macropad , specifically designed for the Autodarts ecosystem. Key Features: True Wireless:…
This project is a custom 4-key macro keyboard with an integrated 16x2 LCD display that shows real-time CPU and GPU temperatures . The device is based on an ESP32-C3 microcontroller and communicates with the PC via USB-C . Temperature data…
M42 to M42 macro extension tube designed specifically for 3D printing. Firm grip for secure mounting Textured internal surface for reduced internal reflections Working aperture Chamfered edges to counter elephant's foot Chamfered threads…
When printed in PLA+, surface/fitment quality is better. In the pictures it is printed in PET-CF for durability. Leg screw holes needs deburring from both sides, the fitment is press/forced at first and then by screwing in and out a bunch…
Base+ for a 12 key 4 knob macro keyboard improved
This is a modified version of the MK75 that adds a 5 way switch, lots of macro buttons and an OLED The wiring is shown on a picture. If you wish to replace the 5 way stick with either a button or a knob check out the original files here:…
Bill of Materials (BOM) Controller: 1x Arduino Pro Micro (ATmega32U4). Switches: 9x Outemu Red Mechanical Switches. Display: 1x 0.91" OLED Module (128x32, I2C). Encoder: 1x EC11 Rotary Encoder. Keycaps: 9x 1U Keycaps. Print Settings…
Edited 03-05-2026 Testing Silicone Brush vs Brass Brush Just for fun and testing, I also mounted a silicone brush on the left side using a similar bracket design. I want to see if brass or silicone cleans certain materials better — brass…
LumiCon 6×6 Mini Case (Push-Fit) Build Notes: esp firmware version 4_0_0 is the latest stable release with full functionality. v0_1_0 onward contain the virtual pet in addition to stream controls, it is interacted via actions and…
Buils instructions: I'm using general 3d printer settings for this model. It's held together using M3 screws.
; M98 P"0:/macros/Kalibrieren/Flow-Test" H210 B55 N0.4 W0.45 F35 bitte werte beim ausführen auf das material und nozzel anpassen stl wird nicht benötigt.
Update: fixed a bug that during the start print the nozzle wipe would not take the preset temp and default to 150C Copy the complete text in your printer.cfg and adjust the CLEAN NOZZLE parameters for the correct printer size and wipe…
After really enjoying my first DIY macro keypad , I set out to create a second iteration of my own unique design that incorporated even more features. Mainly, I wanted to combine custom macro functionality with slide potentiometers for…
I created this slider for macro photography. It uses widely available 3D printing hardware for the most part, and it's fully open source! You can see the design workflow and the slider in action here: The best part of using a 2020…
Clone trooper macrobinoculars great for cosplay, comic cons and other events. Great for a first personal Star Wars project.
I designed this macro diffuser for use with my Yongnuo 560 and Laowa 14mm. Sometimes using the LEDs on the end of the macro will wash out the subject, or I need more light to freeze motion. Adding a flash can helps fill in the light, and…
Needed: superglue 4x threaded heat inserts M3,L5,OD5 (mm) 4x bolts M3,L10 RP2040 Zero 6x Cherry MX switches 6x Hotswap sockets (here) (Optional) Keyboard anti-slip feet Step by step: Join the 2 plate parts (plate pt1 and pt2) with the…
Un simpatico MACRO supporto per 16 schede micro SD con spazio per 1 adattatore SD standard. La scritta e la capacità sono personalizzabili direttamente nello slicer, AMS necessario a meno che non volete stamparlo senza le scritte, i pin…
The brush holder is mounted on the hotbed connector, allowing you to easily move or remove the build plate. You don’t have to worry about the glued silicone wiper when changin plate. The design also takes only a very small space on the…
🔗 Ready to build your own? For full documentation, assembly guides, and software downloads, visit the official project hub: here 🔥 Key Features Smart Profiles: The Wdeck detects which application you are currently using and automatically…
A sleek and modern case for your Adafruit macropad. The 2-part design is easy to assemble and the case is sturdy thanks to the 4 M3x8 bolts. Dust cover included Print at 0.2mm layer height
Source code & documentation on GitHub: https://github.com/canmuhammedkelek/macropad Custom 3D printed enclosure for a 6-key macropad with integrated NeoPixel LED slots and Raspberry Pi Pico 2 W mounting bay. CASE DIMENSIONS - Overall: 77…
Macropad 5 Layer This is the Macropad 5 Layer . It’s built to be versatile: the system allows you to completely change what the buttons do depending on the active mode. No fluff, just 4 keys and 5 potential layers. Find your own…
A clip to mount a macro lens for the P2 thermal camera. Useful for PCB inspection. The used lens is a Cloudray 12mm lens with a focal length of 63.5mm. PN is: USFL05D12F63 Printed in nylon via JLCPCB printing service.
Use a Klipper macro to fully automate nozzle cleaning with this parametric mount for 2020 extrusion and a brass brush. I have modeled for a specific brass brush (link at the bottom) but you can edit the f3d file to use any brush…
I made a custom macro keyboard with 3d printed keycaps and a case. You can find the code and the gerber file for the PCB on my github page https://github.com/APurbiya/A-Purbiya Youtube video comming out soon.
I wanted to have a simple and protective case on my macropad, so I designed and made this with solidworks. This is for the original “Sweet 16” Macropad from 1up keyboards, modeled based off of using vogon_poetry's base . Settings I used:…
DIY, non-abrasive silicone brush and the included Klipper macro let you fully automate nozzle cleaning. The design mounts to the side of a bed extrusion and is not symmetric, but you can mirror it in your slicer to shift the mount…
Decided to hand-wire my own macro-pad and ended up creating a parametric design in Fusion 360. You can change the number of keys on the X- and Y-axes using the parameter function in Fusion 360. You can find the Parameters under the…
This is an adapter/tripod plate to allow attachment of the Sony 70-200mm F/4 G2's collar to an arca swiss style tripod head. This adapter fits seamlessly to the collar's mounting location. My goal was for it look like it belonged there…
Macro Keyboard with self-made key Additional material: Arduino pro micro x1 M4 threaded insert x2 M4 x 10 screw x2 Matrix board x1 Buttons x12 cables
A very simple 3, or 4 Key Macro Keyboard Design Hardware Cherry MX (like) Keys Arduino Pro Micro Code It doesn't get any easier really, create a new Arduino file with just this in, edit the Pins and actual Commands, and upload it to the…
Update 23.10.2024 I have reworked the base, the top, the and the knob. I have also created a solder helper for the neokey breakouts, so they will fit the key distance. In the base i have removed all the standoff's as they did not work…
Baseplate adapter to make 10rd p365 magazines compatible with the macro grip. Mainly designed for compliance in 10rd limited states. Can be printed standing up, or on its side. Recommended 4+ walls.
Taken from original designer: "An adapter for mounting a 20mm ZnSe lens to the Tooltop T7 thermal imaging camera dongle. This lens works very well for PCBs and close-ups: 101.6mm 20mm ZnSe Lens Assemble with M2*4mm screws, M2*2.5*3.2…
![Macrotrack Oval Speedway Miniature [SAMPLE PACK]](https://media.printables.com/media/prints/1009945/images/7678308_aa95b304-5308-43e3-bddf-6b785481ac81_8a3a918b-c5a0-43ec-ba69-23c00beb1719/pxl_20240916_032001340.jpg)
![Simple DIY Macro Keyboard [3/4 Key's]](https://media.printables.com/media/prints/100704/images/1014025_feaf37a8-89bc-463b-80f1-76f3dd5170ac/img_0672.jpeg)
