GCode-Macro heat up Sovol SV08 using Xenomorph and Eddy probe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This macro is designed to provide controlled, stepwise heating to minimize thermal stress and ensure accurate readings
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 285
- Wydruki
- 0
- Wyświetlenia
- 3001
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The STL was added just to be able to create this repository.!
Using this Macro i solve 2 thinks
1. Im sure that the bet it will not get warped/taco because it is heated gradually
2. Eddy will not be heated up because it is moved out of the print area. using this method after 20 min i can hit print the chamber is over 40c and the bet 100 and eddy not more that 50c
some times I engage the part cooling fans at 50-60% and this will ensure that eddy is cooled down ( usually i made this after a long print and before start a new one)
I use this macro on my SV08 with Xenomorph Toolhead https://www.printables.com/model/1114702-xenomorph-orbiter-toolhead
The file uploaded is you have to change the name in .cfg
And in printer.cfg add
[include heatup.cfg]