GCode-Macro heat up Sovol SV08 using Xenomorph and Eddy probe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This macro is designed to provide controlled, stepwise heating to minimize thermal stress and ensure accurate readings
- Rating
- 5 / 5
- Likes
- 53
- Downloads
- 285
- Makes
- 0
- Views
- 3,005
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The STL was added just to be able to create this repository.!
Using this Macro i solve 2 thinks
1. Im sure that the bet it will not get warped/taco because it is heated gradually
2. Eddy will not be heated up because it is moved out of the print area. using this method after 20 min i can hit print the chamber is over 40c and the bet 100 and eddy not more that 50c
some times I engage the part cooling fans at 50-60% and this will ensure that eddy is cooled down ( usually i made this after a long print and before start a new one)
I use this macro on my SV08 with Xenomorph Toolhead https://www.printables.com/model/1114702-xenomorph-orbiter-toolhead
The file uploaded is you have to change the name in .cfg
And in printer.cfg add
[include heatup.cfg]