1 / 12
HaloPad V2 (Adafruit Macropad Enclosure)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printable enclosure for the Adafruit Macropad PCB, inspired by the Nuphy Halo 96 keyboard
- Ocena
- 5 / 5
- Polubienia
- 129
- Pobrania
- 284
- Wydruki
- 4
- Wyświetlenia
- 3411
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (11)Wydruki i komentarze (Wydruki: 4) (Komentarze: 12)Remiksy (2)Kolekcje (160)Powiązane
3D printable enclosure for the Adafruit Macropad PCB, inspired by the Nuphy Halo 96 keyboard.
Needed:
- 4x M3x8 screws
- Adafruit Macropad
Print: Print all 3 parts facing down (as shown on pic), only the PCB bracket need support
Assembly:
- Mount the PCB to the bracket with the 4 screws, taller part facing the taller part of the main body
- Align the bracket arms with the slot in the main body, if it doesnt fit, you but the bracket in the wrong direction
- Hold the bracket from behind and start clipping the keyboard switches, now the PCB should hold on its own
- If everything is mounted correctly, remove the bracket by removing the screws
- Now we want to make it sturdy, so we are going to glue the bracket to its groove/slot and then screw it back in in the PCB (Can be optional since the PCB is now held by the switches)
- Put the ring on top (aligned withs pins) and make sur the sides are skewed to the right side), then glue it in (Optional)
- Put the knob at the end, since its pushes on the PCB, you can glue it if you want