My Neptune 3 Pro Klipper and Orca config
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My Neptune 3 Pro Klipper config and Orca Slicer profile(s)
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 270
- Wydruki
- 0
- Wyświetlenia
- 954
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
INFO
My Neptune 3 Pro configuration files. It consists of multiple files, some have essential macros, some have macros to make it more userfriendly and there's a central file with variables to control most macros.
My hardware:
Skr 1.4
Raspberry Pi 3B
TMC2208 drivers in UART
48mm steppers
Trianglelabs CHC Pro clone hotend
A carbon bed carriage plate (influences the max speed and accel)
Btt Eddy running Eddy-ng
Other mods:
Voron Afterburner toolhead
A nozzle cleaning brush
IMPORTANT!
This is in no way a stock Neptune 3 Pro and this config won't work with one.
If you're looking for one this might peek your interest:Any calibration values can not be copied and used the way they are. Every printer's different. The config has a macro for pretty much every calibration you need, so use those to re-do these calibrations on your printer.
This config is not for people who need a config they can just copy. Adjustments definitely need to be made to fit your printer. Feel free to implement parts of my config into yours. I have made it easy to adjust to your printer as most macros rely on variables that can be found in the variables.cfg, so for the most part only those need to be adjusted.
The Klipper config is for people who are advanced in Klipper and know how to interpret and adjust a macro.
I will not take any responability for any damage due to improper usage of my config.
The same applies to the Orca Slicer profile
Note the shell_command.cfg doesn't do anything yet. It's something I'm currently experimenting with.