Liczymy pasujące modele…
This innovative junction box is fully compatible with the WAGO 221 series and supports all connector models, including the 221-412, 221-413, and 221-415. Designed for maximum flexibility, the rail-based approach allows you to mix and…
Update 16.03.2024: A new version (V3) is now available and got slightly changes to fit better into the extrusion. Feedback very much appreciated! Update 02/2024: V2 is now available. This version contains filament clips on both sides! See…
**This original config was made by Florian Greco, I just adjusted the config to be more in line for P1P usage** The files in this post are made to be imported to Bambu Studio or Orca Slicer (I am using Orca Slicer), and can be used as…
Do you have some new, fancy dual-color or tri-color filament to play with? Are you wondering which angle to best rotate your model before printing? This Multi-Color Filament Configuration Disk or “MCFCD” will help you determine the angles…
OG Lament Configuration for your Hell Priest or Kirsty Cotton cosplay in homage to the classic horror, Hellraiser. An actual, working puzzle box! Do you dare enter "The Labyrinth"? Updated for ease of printing and assembly. It's still a…
Negative-pressure (pulls air) 5015 fan case and shroud for the BentoBox v2.0. The new V2.0 BentoBox design is great, however I do not agree with the original authors fan choice; 4020 axial fans have very low static pressure of around 7 mm…
A somewhat functional version of the puzzle box from the Hellraiser movie franchise. Turn one of the dials to unlock the box and allow it to be moved to the star configuration. Does not summon Cenobites though. The face designs are based…
Reproduction of the Hellraiser Lament Configuration based on LeMarchand Boxes. Phillip LeMarchand was a French architect, artisan and designer who is posthumously credited as possibly one of the most prolific, if undiscovered, mass…
I printed it in PETG with 40% gyroid infill and 4 perimeters and he “rubber interface” in TPU 95A with 2 perimeters and 20% infill. The rubber interface is a nice touch but definetely not required. If you have a round adhesive bumper pad…
These draw/discard trays keep cards in place. Available in a variety of configurations, such as one, two, three or four bins. (The smoothness of the angles will be largely determined by your layer height resolution.) These were designed…
UPDATES 2025.08.08: Testing v2 Troubleshooting the problem with PID config (removed control = pid from [extruder] section) Fixed problem with position_endstop error (changed position_min in [stepper_z] section to -3.5) Improved clarity of…
After printing a couple of boxes from Termlimit I saw that the source from Sttrife included the SCAD file, so got about making some extra configurations to suit my needs. Of small note... the groves along the outside are a little shorter…
These macros are designed to enhance the Flsun T1 Pro printing experience by improving temperature handling, automating bed mesh calibration, and providing clear on-screen and console feedback throughout the print process. Changelog:…
OctoPrint/OctoPi Camera configuration for Prusa 3D printer MK3S(+) This configuration is used for monitoring and controlling a Prusa MK3S(+) remotely using the OctoPrint software suite ( https://octoprint.org/ ) an RPI4B (…
I am preparing to design and build a Krauss-Maffei locomotive, so I wanted to practice 3-D printing an entire locomotive. I used Daniel Noree's base design for the OpenRailway EMD SW 1500 and printed a 1:32 version of it that incorporated…
See original for more options and details. Trying to keep this release nice and simple. Includes gold inlay as a separate model for a flush finish for MMU capable printers or dual extruders. Print both lower-art-v4.2.stl and…
VKB STECS Base & Back Plate Reconfiguration Pack v1.0 Created by John5 CC BY-NC-SA 4.0 Printable base and back plates to reconfigure your VKB STECS. Including Mini, Mini+, Standard, and Max compatible baseplates as well as a backplate for…
The Lament configuration - art by artist064 "The original Lament Configuration was created by Simon Sayce for the original Hellraiser movie". I have attempted to remain faithful to the original design, however it is apparent that multiple…
Have you ever wanted to redo your first-layer calibration, but you have a 0.6mm nozzle installed (or some other variant configuration)? The STL file below allows you to slice a first-layer test print for your printer's particular…
The lost Lament Configuration Dice/Box
Creality K2plus Orca slicer configuration file for CFS multifilament system, plus other settings. Add it to your ORCA slicer, etc, by pressing: import 3mf/stl → press OK → Then save printer profile.
A cool-looking, but also practical print - That's what I wanted to design to take part at the Pursa-Gardening-Contest. So I came up with this idea. A honeycomb pot-design, which can be configured in two ways: You can place one group…
A handy component storage / hobby box with a hinged lid and clasps to keep it shut. Featuring a removable tray which when in place and the lid closed, prevents spillage of items between compartments (as long as the items are bigger than…
Sniper variant of the DC15 Commando. Ideal for custom figures or cosplay. This variant comes with and without stock in both a standard version for 1:1 scale and also a thicker/reinforced version for 1:12 while 1:6 has both versions as…
Should fit a standard size Kleenex box. Print slow and steady …and be careful you don't accidentally summon the Cenobites!!!
Summary Gridfinity implementation containing: Ultralite Bin - Basic bins designed to reduce filament usage. Flat-bottomed Bin - Same as the Ultralite bin, but with a smooth bottom. Circular Bin - Bins designed for holding circular objects…
This is a 1:29 scale Southern Pacific Krauss-Maffei ML 4000 Cab Unit operating G Scale locomotive. This is an original design. You can see a video of it operating here: https://www.youtube.com/watch?v=_HtZxRTPkEw Andrew Corbett has also…
This is an Ice-based timed lock. You can connect 2 or 4 locks to give the captive more ice to melt! I've included a tray to make it easy to freeze the locks. All you need to do is fill the locks with water, add the keys, place the locks…
Prusa XL 5 Tool Configuration File for RepetierServer. If you have less than 5 Tools, just delete the other tools under Tools Tab.
Fold-Flat IKEA SKÅDIS Organizer System Print flat. Fold strong. Organize anything. A universal family of fold-flat organizers designed around one idea: Why print a 3D object when you can print a flat sheet and fold it into one? The entire…
When using a Mellow V6 Pro adapter ( https://www.aliexpress.us/item/3256804525082538.html ), the tip of the nozzle goes even lower than with the Rapido UHF configuration. The original EVA3 probe mount barely catches the probe in the…
Link https://github.com/flight505/FLSun_ConfigCode?tab=readme-ov-file#flsun-s1-pro-klipper-configuration ### 🚀 New Features: - **M141/M191 Commands** - Control outer bed zone like standard bed commands - **BED_TEMPS Macro** - Set both bed…
This brake modification increases the usable space in the brake piston by freeing up unused space in the original design. This allows up to 3 springs to be used at once, significantly increasing pedal travel. Also, longer spring and…
This Thing contains the configuration files for Simplify 3D users who want to use it with their HyperCube or CoreXY printers. I was forced to have at least one STL file so I found a little frog like the one S3D uses for their website.…
Overview The Portable Mini Weather Station is a compact and versatile device designed to provide real-time weather updates, temperature readings, and other atmospheric details. Built with an ESP12F microcontroller and a 1.5" TFT display,…
I have mounted the orginal bearings upside down and added more in the old place of them to make the carriage more rigid. But this also meant that the wobble fixes from others wouldn't work anymore for me. So I designed my own anti wobble…
Configuration of UC2 cubes and inserts for spectrometry with a USB Fiber spectrometer. UC2 inserts include a holder for cuvettes, a light screen to protect cuvettes to be illuminated on their sides, a self-centering holder for an LED…
Lose your config block? Here's an easy model to print and configure your opentrons OT-2. This is used to configure the z axis of the ot2 pipettes. Infil: 5% PLA or PetG
Power Strip / Power Distribution for XT60 connectors. Multiple models are available. Variations include: 2 through 6 Female XT60 Outputs with 1 XT60 Male Input. Optional Power Switch. Optional Mounting Tabs for all Variations. The model…
An educational model of the ULA Atlas V rocket with Boeing Starliner capsule on top in the launch configuration. Supports should not be needed. Scale up or down for your classroom need.
This is a Shield for AIO FC to mount a whoop like a Pusher... Print Settings Printer: Delta Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament: any TPU Category: Hobby
My Rubbermaid Configurations wire shelf has a smaller area between the two horizontal wires at the edge, so I modified bpmarkowitz's model. The original clip dimensions were perfect otherwise.
This is a VERY simple little mod to extend your spool mount on an Ender 3. It was a little too low and often touched my belt that controls my dual z axis, so I needed it higher up but I don't like the side mount notion. I chopped up and…
I wanted to use the same belt path for the x-axis along the linear rail with Stealthburner for my Tevo “Railnado” and this worked out great. I printed it in ABS+ on my Voron 2.4 and it needed bunch of supports but still printed great and…
Someone enhanced the "Vyper Filament Sensor Holder with tension stabilizer" https://www.thingiverse.com/thing:5151737 ("old") by adding a filament support block at the outlet side of the holder - but I can't find his work to reference…
Remix of Lament Configuration Puzzle Box by @tmackay with separated decorations.
I have a RunCam Nano 3 that I need to use on my Beta85X Pusher, so I decided to use the LED mounts on the back. It can fit any frame that have Led Mounts like Trashcan and Beta95X. The strap is to pull it over the camera and lock on the…
For my Shelly controlled BentoBox I wanted ... ... a bigger carbon box (5 instead of 3 rows) ... an additional hepa box that I can place below the carbon box ... a smaller top hepa box to make room available for a larger carbon box ...…
I'm assembling a Beta85X frame to run as a Pusher and designed this little foot for make it more raised from the ground. Print it as lower as possible, like 5mm/s in TPU to best result. Category: Hobby
This is a remix of @SSX556_913491 's BentoBox v2.0 5015 pull-configuration. The main feature of this remix is to add compartments for a Shelly 1 and WAGO 221 spring-clamp connectors. Moreover, this remix includes a shroud that is…
This is a tool meant to mount on the tail motor shaft of a tricopter. It's designed for a 5mm x 11mm long shaft and the Wixey digital angle gauge WR300. The basic premise is it is used for calibration the tail servo position in Triflight…
A knob guard designed for the Zoom LiveTrak L6 and L6max series. Protects from unwanted master level adjustments that may be caused by a stray cable or brush of the arm, while still allowing access for tweaks using a finger tip. NOTE:…
Kirigami Bed Brace: 2x Wago+3010 Fan Configuration BOM: 2 off M3 x 10 (for fixing to the Nut Block) 4 off M3 x 6 (for fixing the Kirigami down the long sides) 4 off M3 x 14 (fan mounting)/2 off M3 x 14 & 2 off M3 x 16 (cable guide+fan…
This is a Micro Knex full leg configuration that uses three servo cradles. It is suitable for use as a leg mechanism for a hexapod or similar type of walking robot.
I designed these models to allow me to move the tablet to the rear of the chassis, allowing easier access to cups. I use one 3M control strip under the stand to keep the base firmly planted, and another one with a hook for routing the…
The Problem I am building an updated print garden loosely based on an enclosed server rack design, complete with printers on drawers, draw through air, and cable management. To keep things tidy, I wanted to use similar style server cable…
I like using a Soroban for calculations and wanted to have one with me when I go shopping. So I needed a small model that would allow me to maintain the configuration while walking. Simply press the button to release the moving parts and…
Multiconfiguration WAGO Junction Box V2 – Waterproof and pole mountable This is the next-generation version of the original Multiconfiguration WAGO Junction Box – now upgraded with robust new features to meet real-world demands. Check…
Power Strip / Power Distribution for XT60 connectors. Multiple models are available. Variations include: 2 through 6 Female XT60 Outputs with 1 XT60 Male Input. Optional Power Switch. Optional Mounting Tabs for all Variations. The model…
Power bank enclosure for 18650 batteries, designed for a 100W board. The front and back parts are recommended to be printed in PLA, while the top and bottom parts should be made from PETG. The display is desoldered from the board, then…
VKB STECS Base & Back Plate Reconfiguration Pack v1.0 Created by John5 CC BY-NC-SA 4.0 Printable base and back plates to reconfigure your VKB STECS. Including Mini, Mini+, Standard, and Max compatible baseplates as well as a backplate for…
Desk Organizer - Make your own configuration! For all type of printers, multicolor or not. NO SUPPORTS! For notebook, learning sheets, tools, rulers, pencil, markers, MicroSD and SD cards, USB and more! ALL AT THE SAME TIME! Choose the…
This innovative junction box is fully compatible with the WAGO 221 series and supports all connector models, including the 221-412, 221-413, and 221-415. Designed for maximum flexibility, the rail-based approach allows you to mix and…
Do you need a super specific set of threaded passthroughs on your Voron exhaust cover? Did you use 3mm foam seal on your back panel, instead of the BOM 1mm? I got you covered. When browsing the files, select the folder for the thickness…
This is my version of a DeWalt battery holder, made a relatively simple design with various configurations to meet different needs. Did these a while back as a gift for friends and family, made some updates to them and decided to share…
Single, double, and triple switch types, rocker, toggle, duplex, and blank in most combinations (except the triples which have too many) are included as STL files. OpenSCAD source included so that you can product more triples in any…
Multiconfiguration WAGO Junction Box V2 – Waterproof and pole mountable This is the next-generation version of the original Multiconfiguration WAGO Junction Box – now upgraded with robust new features to meet real-world demands. Check…
These are the STL game files for my Electron Configuration Game found at https://www.teacherspayteachers.com/Product/Electron-Configuration-connect-four-Game-for-2-players-4934293 Category: Physics & Astronomy
Power bank enclosure for 18650 batteries, designed for a 100W board. The front and back parts are recommended to be printed in PLA, while the top and bottom parts should be made from PETG. The display is desoldered from the board, then…
That table legs use conique curve, providing stiffness with minimal material. In my test of load, on one set of legs screwed to the deck, I did put 5 kg of steel. As table ("sturdy" model) for the test was 72 mm high, a table 10 times…
A simple yet elegant sculpture. Should print without supports. Please "Like" this file, if you collect or download it. Category: Sculptures
Added a larger 4x4 grid that can comfortably fit within a build volume of 220x220. Also added several configurations that are not available in original 4x4, 4x3, 4x2, 4x1 3x3, 3x2 2x1 Category: Organization
you can print all these in draft mode as fast as you please. BUT the spindle assembly for the threaded parts i would print in the finest detail you can. it makes the threads work a lot smoother. should not need support for anything. There…
A CFD analysis is available via SimScale: https://www.simscale.com/projects/pggg1/cfd_tandem_wing_analysis/
