VKB STECS Base & Back Plate Reconfiguration Pack v1.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable base and back plates to reconfigure your VKB STECS. (Mini, Mini+, Standard, Max)
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 313
- Wydruki
- 0
- Wyświetlenia
- 1372
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
VKB STECS Base & Back Plate Reconfiguration Pack v1.0
Created by John5
CC BY-NC-SA 4.0
Printable base and back plates to reconfigure your VKB STECS. Including Mini, Mini+, Standard, and Max compatible baseplates as well as a backplate for the STEM module. Want to reconfigure your STECS throttle but don't want to pay an arm and a leg in shipping from China? Got you covered.
I made a split version of the Standard plate for compatibility with smaller print beds. If there's enough interest I'll make an MFH but IMHO it's not a great way to mount the STEM.
Print oriented as shown. A brim is suggested to prevent warping. Print with >5 perimeters and >40% infill for strength. No supports are required.
Note, STEM back plates require M3 hardware. (either nut or heatset insert)