1 / 3
Lian Li O11 Dynamic GPU anti-sag for bottom fans configuration
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
your case is too beautiful for saggy GPUs
- Ocena
- 5 / 5
- Polubienia
- 82
- Pobrania
- 787
- Wydruki
- 5
- Wyświetlenia
- 5176
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 5) (Komentarze: 18)Remiksy (0)Kolekcje (109)Powiązane
- I printed it in PETG with 40% gyroid infill and 4 perimeters and he “rubber interface” in TPU 95A with 2 perimeters and 20% infill.
- The rubber interface is a nice touch but definetely not required.
- If you have a round adhesive bumper pad (such as these ) you can use that instead of printing the rubber interface