1 / 5
EVA3 SuperPinda mount for Rapido SUHF configuration — zdjęcie 1
1 / 5

EVA3 SuperPinda mount for Rapido SUHF configuration

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The mount sits lower to secure the probe correctly in SUHF configurations, where the probe needs to go way down.

Ocena
0 / 5
Polubienia
10
Pobrania
74
Wydruki
0
Wyświetlenia
512
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

When using a Mellow V6 Pro adapter (https://www.aliexpress.us/item/3256804525082538.html), the tip of the nozzle goes even lower than with the Rapido UHF configuration. The original EVA3 probe mount barely catches the probe in the correct position. The probes sticks out excessively and it's not straight nor secured in place.

This remix addresses the issue by dropping the mount and the screw 10mm, securing the probe correctly.

It uses a M3x6mm fitted insert instead of a trapped hex nut to avoid the hassle of fitting it. Use a M3x10 bolt at least.

Tagi