1 / 5
EVA3 SuperPinda mount for Rapido SUHF configuration — image 1
1 / 5

EVA3 SuperPinda mount for Rapido SUHF configuration

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The mount sits lower to secure the probe correctly in SUHF configurations, where the probe needs to go way down.

Rating
0 / 5
Likes
10
Downloads
74
Makes
0
Views
512
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

When using a Mellow V6 Pro adapter (https://www.aliexpress.us/item/3256804525082538.html), the tip of the nozzle goes even lower than with the Rapido UHF configuration. The original EVA3 probe mount barely catches the probe in the correct position. The probes sticks out excessively and it's not straight nor secured in place.

This remix addresses the issue by dropping the mount and the screw 10mm, securing the probe correctly.

It uses a M3x6mm fitted insert instead of a trapped hex nut to avoid the hassle of fitting it. Use a M3x10 bolt at least.

Tags