Counting matching models…
Edit - v2 added for easier printability and a tighter fit around the dragon structural heatbreak. Keep an eye out on www.3dpandme.com for full installation pictures and content. This is the heated insert variant. I won't be doing a hex…
EVA3 dropped support for MGN12H and here I am adding it back in! Keep an eye out on www.3dpandme.com for full installation pictures and content. BOM: 4 x M3 inserts Support me by buying your dragon hotend (or any other 3d printer…
Adds sherpa mini support to the EVA3 ecosystem. You can use the standard front however assembly will be easier with the modified front included. The only difference is a small cutout to allow assembling the front bolt easier. This is an…
***Update: Aug 18, 2025*** Added left side cutter. This was actually the original way I did it and was unpopular in the discord during development due to widespread superpinda use at the time. Obviously with the cutter on the left, the…
You can find the build instructions and links for components in the article: www.modernmakes.ca/blog/cpap-fan-eva3 Full guide on installation and setup here: www.modernmakes.ca/3d-printing/cpap-fan-guide
Edit2 - Fixed lower holes which I had forgotten to rotate for Dragon mounting. Edit - I was asked quite a lot to make a hex nut variant so here it is. For the insert version you can find it here . Note I haven't printed it but it's…
Adds sherpa micro support to the EVA3 ecosystem. You can use the standard front however assembly will be easier with the modified front included. The only difference is a small cutout to allow assembling the front bolt easier. Fasteners…
I installed a front-idler tensioner mod on my RatRig VCore3, and wanted to remove the pesky backplate tensioners from my carriage, so I whipped this super simple version up in OnShape. Literally just flattened out the backplate, and…
edit - updated with the latest version (the original was a modified beta part that was missing the cable tie slots) edit 2 - I originally made this part much thicker to avoid snapping but i've been asked for a thinner version to allow the…
This is a remix based on https://www.printables.com/model/214126-eva3-dragon-hotend-mount-hex that allows to use a Trianglelab CHC Pro hotend setup with the standard EVA3 carriage assembly that can be found here https://main.eva-3d.page/…
This replaces the EVA cable guide mount with a frame to attach a board meant for a 42mm stepper such as a BigTreeTech EBB42. If you are running input shaper on klipper you will need to set axes_map: z, x, -y This does mean that there is…
Higher X-endstop to match with Eva 3 release, with or without RR logo Original file by Pawel KUCMUS https://github.com/pkucmus for Ratrig :…
This is the heat insert version. End-stop switch is modified to go 3mm lower to come closer to where EVA2.x one was (less modifications on other parts of the printer). Make sure the bolts used to mount the end-stop switch are not longer…
Galileo 2 SA (StandAlone) https://github.com/JaredC01/Galileo2/tree/main/galileo2_standalone drive component for EVA3 toolhead. The G2SA is still in beta so there is posibility that when changed the component will change too. To be used…
Based off of https://github.com/KayosMaker/CANboard_Mounts this has been modified to attach to the EVA3 cable holder and the orbiter attachment holes have been lowered to raise the toolboard up so there is enough space to attach the part…
Custom EVA for V6 which incorporates Voron Tap-Like probing Single 5015 SB toolboard Custom Hextrudort (mount pattern) with unlock latch, adapted motor position, gear adjustment No Insert, only Nuts for a Mercury 1-like Gantry (MGN12 on…
Modular mount that can be used with no extruder attachment if you have 7mm or more clearance, or attachment to the Orbiter 2.0 or the VZHextrudort-Low . BOM Item Count Description M3 x 5 Heat Inserts 5 or 6 M3 x 6 Counter Sunk 1 Front…
It takes a scavenger hunt to find an acceptable DragonUHF adapter for EVA3. And the one I found has cable-routing issues. I modified it to give extra space for the heater cable to come out the side. It's still not perfect but it's good…
Introdution This Toolboard holder is for the EBB36 (V1.2), mounting to an Orbiter 2.0 on the EVA3 ecosystem, but with cable-support for the USB-C cable & connector ( Note that 24V powerwires are not modelled but attache to the USB cable…
adaptation for blv mgn cube of EVA3, with belt tensioner, and mount for dragon
This is an adaption of the EVA2 Klicky Probe Mount by Jlas1 ( https://github.com/jlas1/Klicky-Probe ) for the EVA3. Print with screw side facing upwards and bed plate support (might also work without support, though not tested). Update…
A remix to add heated inserts to the tensioner-less Eva3 CoreXY backplate. Happy printing!
This is an improved airflow mount for Slice Engineering's Mosquito and Mosquito Magnum hot ends compatible with the excellent EVA 3 Modular Carriage Platform. These models offer the following improvements / features: Improved the airflow…
I found the EVA3 posted version still a bit too high and didn't properly cool. I used the OnShape site and opened the Horns part and modified the config to drop the height from 8mm to 10mm.
This hotend mount is designed for the aliexpress revo six does not use the standard voron spacing and has a 22m cylindrical cooler. Note that this is for the Eva 3 for mercury one where the nozzle distance is 68 mm from the top of the…
Like the summary said. Remixed so that It has a mount for a 1mm piano wire https://www.amazon.com/dp/B07MSFD842
See original model for more detail. This is an alpha untested design (although the original is fully tested). Be sure to print the models in the orientation as I have saved them in. I include the step file for those who wish to make…
Small remix for V6DM Heatsink from Trianglelab (https://aliexpress.com/item/1005005195556343.html)
This model includes two modified parts incorporated into the EVA3 Assembly the comes with the RatRig vCore3.1 printers. These changes allow mounting of a Beacon3D scanner (revH - low profile) underneath the EVA3 behind the Phaetus hot…
replace your endstop with this
Heads up: Soldering skills are required, Multimeter is suggested Note: I suggest Buying the unassembled version of the Beacon Probe. The fan duct interfers with the connecter. I solderd wires between the Beacon and the connector.
Messuhrhalterung zum befestigen an der EVA3. Für die Montage werden 2x M3x16mm und 1x M3 Mutter benötigt. Print-Settings: Material: PLA/PETG/ASA/ABS/PC Layer height: 0.2 Perimeters: 4 Top Layer: 4 Bottom Layer: 4 Infill: 50% Support: No
Recommended filament: ASA-CF, ASA, ABS. Infill 25-30, 0.2 mm layer.
EVA 3 VCast IDEX Backs (hex and heat insert versions). Requires a MGN12 rail instead of MGN15 (as MGN15 was discontinued in EVA 2.4)
This is a simple remix of a great design by Arthur_C making it work with an LGX Lite extruder. All mounting parts needed are in the original posting. Designed to use 2 m3 heat sets instead of nuts.
请参考原作者模型 仅在原作上添加切刀限位器 这是eva适配bambu hotend的作者 https://www.printables.com/model/398349-bambu-lab-for-eva-3
Modified original version to use Hex Nuts for mounting over heat inserts, creating additional spacing around corners of the board due to needing to increase thickness of the posts to accommodate M3 hex nuts.
Adds Libra Mini support to the EVA3 ecosystem. This is an insert version and requires M3 x D4.6 x L4 inserts. I source mine from here . Note this is an affiliate link and supports further mods and development work from me :) 2 x M3 insert…
This is a remix of the EVA3.0 adapter for the LGX to be compatible with the ERCF extruder sensor (AH3364-QPB). BOM: PTFE part is 6.8mm (add this to the length of the hotend PTFE length) M3 steel washer 6x3mm magnet (1 or 2, I use 2…
Inspired by the mount from Ruffle (https://www.printables.com/model/185451-eva-adxl-mount), I created a mount for the Adafruit ADXL345 with 19mm hole spacing, that fits any of the shrouds of EVA3, by re-using the mounting-holes. You…
This is the Eva3 Chonky shroud, now with wider spacing between the shroud and hotend, as well as longer sides to fully cover the toolhead. Makes for a very clean look. No additional hardware, or alternate mounting methods. Mounted on a…
EVA3 toolhead for Ender-5 S1 based on Hoon linear rails conversion MGN9H x-axis linear rails Mount plate for stock Sprite extruder Mount support for stock PCB Mount support for CR-Touch No support for stock hotend, must be changed with…
I use the LDO Orbiter 2.0 on the EVA3 carriage for my RatRig V-Core3 500 and couldn't use the factory strain relief mount, due to clearance issues. I modified the original file to extend the mount back and up to create more clearance.…
If you are using: a 4028 part cooling fan Squirrelbrain's FBS/Narrow EVA3 mod Then you need this fan duct, especially if using an x-axis dragchain like Squirrelbrain's mod for the RatRig V-Minion. UPDATE: I've added a seal that you can…
I hated all currently available designs for an ebb42 toolboard mount on EVA3 that uses CPAP cooling with an Orbiter 2.0. I didn't want to put a big piece of plastic on the back of the motor cause of cooling concerns. Having it off the…
This remix is for the titan extruder to work with the EVA3 Ecosystem.
When using a Mellow V6 Pro adapter ( https://www.aliexpress.us/item/3256804525082538.html ), the tip of the nozzle goes even lower than with the Rapido UHF configuration. The original EVA3 probe mount barely catches the probe in the…
use the Git-hub for the rest of information
This is a mod of the original eva3 eddy mount but i have added slots for any size horn you select.
eSun ABS+ 0.2 Print 20% Cubic Infill
I remixed the ivan5rov top_endstop for the mgn9h rail with heat inserts also for the endstop, because my screws did not hold enough in the original version. I recommend to print it on the side not as in my picture shown - flat on the…
[EDIT 06.03.2023] Changed form arc to 45 degree overhang and a short bridge for much easier printing.
Hi, I've created mod for V-minion - which is replacing 6mm belt with 10mm belt. New X motor cage also fixes issue with X endstop - EVA3. I also decided to change air duct of 4028 fan - just for better looking. Additionally - X idler - 3d…
Simple hotend mount for EVA3 to use Creality K1/SE hotend. In my opinion this is one of best budget hotend on market.
This is the fan duct for the EVA3 print head. This duct has the dual 5015 fans laying flat to stay closer to the gantry instead of side by side. This gives more clearance in the back.
On my Vcore3 500 the cable support on my eva3 hotend broke after only a couple dozen hours. It is a weak design because it has to make room for the 4028 fan or the dual 5015 fans that run perpendicular to the back plate in the stock EVA3…
Fan inlet with holes for threaded inserts. Compatible with EBB42 rear mount: https://www.printables.com/model/621410-ebb42-mount-for-v-core-31-200-with-eva3-and-orbite
Hi, I've designed Klicky Z-Endstop for RatRig V-Minion with EVA3. Because of it's construction is really hard to get ‘space’ for that solution. But after few ‘little’ modifications You will be able to do it! First steps: Move X engine…
The original fan ducts directed the air in front of the nozzle, even with a single 5015 fan. This modification brings the ducts slightly closer to the hotend and changes the angle so air blows directly under the nozzle. Tested with REVO…
this is a rework of the original EVA3 5015 fan mount so that is doesn't protrude so much. I have a toolboard where the cable relief goes so i had to put a bit of an angle on the fan attachment.
Why? I'm sure your first question is why ? Isn't the stock single 4028 inlet enough? From a purely functional stand point, I believe it is, yes. However, it also has the potential to be extremely noisy. The 4028 fans default (fail) to…
This is the mount I am currently using on my V-Core 3 with EVA3 carriage. I trimmed 3mm off the stand-offs; you may need shorter heat-set inserts.
if you want eva3 hotend like me, you lost 15mm of bed size, this holder moves your bed 10mm and also bed need move up 40mm, with this simple holder you can do it. print one like this and other in mirror, recommended at least PETG, but i…
I wanted to use a leftover 12mm M6 bolt from the assembly of my Rat Rig printer to mount the dock to the frame. I enlarged the bolt hole and dropped the height. New hole diameters: Bottom hole - 10.8 Top Hole - 6.8
Spider 3 Pro mount + BLTouch mount for EVA3 using high flow ducts. (Works for E34M1 i believe) Hopefully this helps someone.
Minimalist filament cutter designed for the EVA34M1 toolhead by Jon ( https://jon-harper.github.io/E34M1/ ), intended to have wide compatibility with all extruders, tested with Sherpa mini. Goes underneath the extruder mount, uses a #17…
Modified hotend mount to fit Trianglelabs Dragon ACE. Includes both hex nut and heat insert options. This part uses “short” (4mm) M3 heat inserts such as these I HAVE NOT printed or tested these yet as they're for an upcoming project, but…
Added corner cutout to fit the tilted EBB36 on sherpa micro stepper.
This is the adapter for EVA 3 carriage. It would be used like the other adapter avaible for the carriage (like for orbiter 2.0 or LGX lite). it needs 2 x m3 12mm to lock the extruder to bracket, additionally you can use another 2 x m3…
A remix of the original that uses a hex nut but is pain in the ass to assemble. Melting in a threaded insert is much cleaner and easier. However, take care to not melt it too far as you will have a hard time to adjust the probe when…
I do not like nuts so here is a version with 4 mm holes for M3 brass heat inserts
VC3.1 200 has a small space under the top, so mount is lowered and the cable mounting is oriented forward to prevent the cable from scraping the housing. Of course, it is also suitable for the larger RatRig V-Core 300 - 500. The mounting…
Modified EBB Front part with strain relief inspired by another design , so it provides better support for USB-C and power cable. Note: design is based on converted STL, as I didn't notice link to Onshape. 🙈 It's huge and PITA to work…
I made a Duet 3D Toolboard 1LC holder to connect to the EVA3 system and add stability. I added an arm that screws directly into the Orbiter screw, just use a longer M3x30 screw to connect the orbiter to the board back. Apologies if this…
A Remix of the original Klicky probe for EVA3 with a longer body and pin to make room for a Volcano or Rapido UHF hotend
Needed to shorten the distance from the mounting rail to the probe slot and use a M6 bolt.
Alternative lever for EVA3 Filament cutter from Billyd. This lever enables the use of a ballpoint spring.
Print it with the screw holes on the plate. Uses the M2.5 12mm screws that come with the hotend to mount it. Don't use the 3mm spacer that they include in the box. When screwing on the dragon, have the heater wires come of the right side…
I did not create these files, I only modified them to work for my machine. All credit goes to the original creators. These are the EVA3 parts needed to mount the CHC XL hotend and the ij8 probe. The probe mount takes M3 heated inserts…
Instead of the unreliable and hard to tune hall effect sensor I am using a OMRON D2F-5 microswitch and a 7mm steel ball. This give reliable results with minimal tuning. The part is deisgned to fit, no adjustment should be needed. just put…
Offset is -17.7mm for Carto V4, Beacon should be -1mm different from Speedy's model EDIT 12/28/2025: Fix Z offset to be between 2.6mm and 3.0mm
Just a quick v1 remix!
This is a toolhead based closely on the EVA3 I modeled it to allow for installation on a Tronxy D01 so as not to sacrifice any of the build plate volume. Components I remodeled from the ground up: Cooling horns (to suit a red lizzard K1…
Remake of Front Universal (Heat inserts) EVA3 to fit the LIS3DSH accelerometer.
Here are 3 files plus STEP file for edit Simple - no need any supports when printing, this small bridge can do any printer. Screws - just in case you ran out of brass inserts Inserts - just in case you ran out of screw nuts print 5-5-5,…
Couldn't find a hotend mount for the EVA3 printhead for my Slice Copperhead so I grabbed the mosquito version and made my own to fit.
This custom-designed mount allows you to easily install the LGX Lite PRO extruder on your RatRig or any 3D printer using the EVA3 toolhead. The mount ensures a secure and precise fit, providing enhanced stability and performance for your…
The main issue i had with the model available is that it was on the side and always moved so i had to readjust offset. Warning! Do not recommend this with an enclosed printer or high temperatures, The Biqu microprobe seems to be very bad…
This is a remix for the BTT Smart Filament Detector to fit right above the extruder. Created for the EVA3 System with LGX extruder.
Duet Toolboard and cable chain mount for EVA 3. Recommend to print with 3-4mm layer height and 40%+ infill for additional stability. Works well with orbiter extruders. Longer neck version to help with possible clearance issues with 4028…
The spacer fits between the hotend and the “body”, needs 2x M3 inserts, it serves as a support for guiding the cutting blade. The Dragonfly SIC screws in the “body's M3 inserts with the 2x M3 screws provided. It's a tight fit, does not…
A probe mount to fit a 12mm probe to the EVA3 tool head for the Zero G Mercuryone.1 printer. https://jon-harper.github.io/E34M1/ Thanks for the great mod by Jon Harper. BOM: m3 heatinsert Voron Style m3 bold printed in ABS with ZeroG…
The limit block of V-Core 3.0 is lower than EVA 3.0 limit switch, so I raised it （Baidu Translate）
Change Y-Offset to 0. This avoid first layer problem with Twisted X Gantry
This mounts a Bigtreetech Nebula extruder with a Lancer Meltzone hotend to a EVA3 toolhead. This piece is specifically for the Nebula extruder mount. It adds additional spacing to accomodate for the integrated filament tube in the Lancer…
Print it using 50% infill, with supports and resting by side
This is an EVA3 mount for the Eibos Artemis Extruder. I no longer run EVA3 on my RatRig, so this is based on CAD - that being said, the Artemis and this mount fit together well. STEP file is included if some tweaks are needed! Note: This…
