1 / 3
EVA3 EBB42 Modular Mount for Orbiter 2.0 and VZHextrudort-Low
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
EVA 3 compatible mount of BigTreeTech EBB42 Toolboard with Orbiter 2.0 and VZ-Hextrudort-Low
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 183
- Makes
- 3
- Views
- 1,947
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Modular mount that can be used with no extruder attachment if you have 7mm or more clearance, or attachment to the Orbiter 2.0 or the VZHextrudort-Low.
BOM
| Item | Count | Description |
| M3 x 5 Heat Inserts | 5 or 6 | |
| M3 x 6 Counter Sunk | 1 | Front Plate to Back Plate |
| M3 x 12 | 4 | EBB thru frontplate to back plate |
| M3 x 6 | 3 | Front Plate to EVA |
| M3 x 12 | 1 | Back Plate to EVA Drive Plate |
Orbiter 2.0
| Item | Count | Description |
| M3 x ~35 | 1 | Arm attachment. May need to cut down longer screw to length |
VZHextrudort-Low
| Item | Count | Description |
| M3 x 30 | 1 | Arm attachment. May need to cut down longer screw to length |
Assembly
- Insert heat inserts into your printed back
- Attach back part to front part with single counter sunk screw near the top
- Attach EBB board to back part going through the front part using EBB mounting holes
- Attach assembly to EVA 3 via 3x screws on the front plate
- Attach assembly to EVA 3 vis 1x screw through the drive plate
- If attaching to extruder, there change extruder M3 screw for a longer one that attached to the back part of the assembly via the “arm”
Printing
3-4 perimeters, 20%+ infill. ASA, ABS, or PC (ASA-CF pictured).