1 / 1
EVA3.0 LGX ERCF Sensor Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of the EVA3.0 adapter for the LGX to be compatible with the ERCF extruder sensor (AH3364-QPB).
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 92
- Makes
- 2
- Views
- 1,568
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the EVA3.0 adapter for the LGX to be compatible with the ERCF extruder sensor (AH3364-QPB).
BOM:
- PTFE part is 6.8mm (add this to the length of the hotend PTFE length)
- M3 steel washer
- 6x3mm magnet (1 or 2, I use 2 stacked)
- M3 insert (3.9 smallest diameter)
- M3x18 screw (to hold the sensor in place)
- The HAL sensor (AH3364-QPB)
- A bunch of wires
Make sure that this small wall is printed (usually requires to enable “Thin walls” support).
