Strengthened Cable support, EVA3 with 5015 fan parallel to back plate (remix)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The EVA 3 cable support is very weak. This is a strengthened version for the parallel to back plate 5015 mod by MCoSoNo
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 58
- Makes
- 0
- Views
- 489
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
On my Vcore3 500 the cable support on my eva3 hotend broke after only a couple dozen hours. It is a weak design because it has to make room for the 4028 fan or the dual 5015 fans that run perpendicular to the back plate in the stock EVA3 setup. I have no need for the 4028 or dual 5015 fans on my printer, it interferes with things on my printer, and imo it is overkill. So I used MCoSoNo's EVA 3 Inlet for 5015 fan parallel to backplate mod. This mod also allows me more room at Y=max end of the printer inside my enclosure. However, that mod uses the very weak stock EVA3 cable support print. So I took advantage of the additional room allowed from that mod to make the cable support larger and it will not fail, or let's say if it does you probably broke a bunch of other stuff on the hot end as well! I also changed the fan support (from the mod) slightly to use a 3mm heat set insert, which allows the 3mmx12 screw to engage more thread for a stronger connection. The heat set insert is for a 5.0546mm diameter hole, 3.8mm deep. If your 3mm insert is different, or if you want to make other changes, I also supply the step files for you to mod as you wish.