Variable Speed/Torque control Mechanism - Bonus, Steering demonstration
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mechanism, made up of bevel gears, and spur gears, changes the speed/torque depending on while axel is spin.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Share Alike
I made a Gear Mechanism that changes Torque/Speed depending on which axel is spin
This is a educational design, meant to example of how torque can be increased, using bevel gears to have the same plane.
I recommend that you print the rods separately, as it helps in quality
Use supports for the base.
I will provide the G-code for all gears, and shafts(print one at a time)
But for the base, use a brim, and supports.
I have changed form circular axel, to square.
I have tested the new axel, and make sure your bed is leveled, ideally use a brim for rods, or use a very low speed initial layer, I use that to print very small stuff, and it comes out good.