Variable Speed/Torque control Mechanism - Bonus, Steering demonstration
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mechanism, made up of bevel gears, and spur gears, changes the speed/torque depending on while axel is spin.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 23
- Makes
- 0
- Views
- 182
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Share Alike
I made a Gear Mechanism that changes Torque/Speed depending on which axel is spin
This is a educational design, meant to example of how torque can be increased, using bevel gears to have the same plane.
I recommend that you print the rods separately, as it helps in quality
Use supports for the base.
I will provide the G-code for all gears, and shafts(print one at a time)
But for the base, use a brim, and supports.
I have changed form circular axel, to square.
I have tested the new axel, and make sure your bed is leveled, ideally use a brim for rods, or use a very low speed initial layer, I use that to print very small stuff, and it comes out good.