Vase Mode Overhang Calibration
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A model to test and calibrate the limits of overhang while in vase mode
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 43
- Wydruki
- 1
- Wyświetlenia
- 141
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial
NOTE: Please honor and adhere to the license of this model. Commercial use is prohibited and not allowed.
I plan to create some designs intended to be printed in vase mode. To test/design the limits of what one can do in vase mode, I created this model to test the various overhang angles one can successfully print while in vase mode. This model prints overhangs from 5-degrees to 75-degrees.
On my Prusa i3 MK2S using a 0.4mm nozzle and a 0.12mm layer height, I was able to successfully print with no artifacts up to 65-degrees. 70-degrees also successfully printed, but there was some light artifacts. I was not able to print with a 75-degree overhang in vase mode.