10 Gallon Tank Terrarium Lid v3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces cheap metal mesh lid that comes with some 10 gallon tanks. Improved access door.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 312
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
The mesh lid on my 10 gallon terrarium was too ventilated and rusted from keeping it in high humidity. This has far fewer holes (while keeping some for ventilation) and I printed it from ABS and PETG (ABS warped far less than my PETG half). I used Prusaslicer to split the part in half to fit on my 230x230mm printer.
V2 includes a thinner profile, centered pull bump, and a simple access port. V3 is planned to make the access hatch hinged and more reliable against critters pushing it up.
V3 moves to a simple cover for the access hole. Note that strong enough animals can push it open. V4 will likely improve on that.
