Barrina T8 Vertical Light Stand with Screw Holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds a barrina T8 light and allow it to be screwed down.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 387
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this stand for the Barrina T8 lights. I got tired of my lights being so easy to knock over on my tower system, so I made these. They actually are really stable and sturdy. These can probably be printed with a low infill and be strong. I used stock slicer settings.
There are 4 screw holes, I only used 2 and it's stout. They will probably fit most any screw that has a cone. You could use flat screws but I designed it for the regular screws like any drywall, most wood screws, and some multi purpose screws you will find at any hardware store or around your house.
***** Print upside down on the smaller part, no supports needed. If you print right side up, you will need supports.
Hope this helps, enjoy.