1 / 4
Barrina T8 Vertical Light Stand with Screw Holes — image 1
1 / 4

Barrina T8 Vertical Light Stand with Screw Holes

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Holds a barrina T8 light and allow it to be screwed down.

Rating
0 / 5
Likes
5
Downloads
52
Makes
0
Views
386
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I made this stand for the Barrina T8 lights. I got tired of my lights being so easy to knock over on my tower system, so I made these. They actually are really stable and sturdy. These can probably be printed with a low infill and be strong. I used stock slicer settings.

 

There are 4 screw holes, I only used 2 and it's stout. They will probably fit most any screw that has a cone. You could use flat screws but I designed it for the regular screws like any drywall, most wood screws, and some multi purpose screws you will find at any hardware store or around your house.

 

***** Print upside down on the smaller part, no supports needed. If you print right side up, you will need supports.

 

Hope this helps, enjoy.