Lithium Battery Holder x24 + Standoffs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fitted for Breeze brand- 18500 cells/18mm x 500mm. Printed using Lightning Infill ~40%
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've been collecting the old disposable vapes that I find. I take them apart with gloves and pliers. However, I realized my old toolbox full of these batteries was a hazard. Thus coming up with this organizer. Found inspiration from the linked post from @Lars414_716683, however I make it specific to what I was using to save on filament. Plus only 4 of these will hold 96 batteries!
Settings:
- ADM5 Printer - PETG. I tried using ABS but had too much trouble even in a vented enclosure.
- My printer used about 90g of filament and the model feels solid.
- I used lighting Infill (~40% looked best during preview)
- 3 layers for the top and bottom.
Feel free to comment or download for your own use! Possible this could be wired to a BMS charger as a storage system. However PETG is not a flame retardant.