Liczymy pasujące modele…
Motivation I have a Laser Cutter and AC Infinity 6” Inline Duct Fan requiring an adapter to reduce the 6” fan inlet to the 4” ducting from the laser. Initially, I purchased the AC Infinity Duct Adapter, 6” to 4” Ducting Reducer , but as…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed using ePLA. use support as already planned in the attached bgcode file or use your own.
Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu
Planned for low pressure. Printed using ePLA. Use support as already included in the attached bgcode file or use your own.
Wydruk około 0,79 €–0,97 € nettoWstępna wycena jednego wariantu
No additional parts are needed. I used: Material: PLA Supports: No Layer: 0,2 Nozzle: 0,4 Brim: Optional BUT geometry its printer-friendly so it will be okay if you use other configs. AND its symmetrical so it works on both hands. UPDATE…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena jednego wariantu
Scroll Down for Assembly Instructions Purpose This set of models is the result of testing to help reduce VFA (Vertical Fine Artifacts) coming from the misalignment of the Y axis belt on the MK4. As originally designed, many of the parts…
Its here, Version 2 of the cycloidal reducer! All the hardware is the same from the original version, however every printed part has been redesigned! Here are the current improvements over the original: It is now easier to print and…
Check out version 2 here ! At the moment (6/7/24) it is still in beta, but version 2 is still better in almost every possible way! Reduction specs: 64/1 reduction. NEMA 17 mounting. BOM: 4x M3x25 cap head bolts 2x 10x15x4 bearings 1x…
just a simple reducer from 25mm to 20mm for electrical PVC Conduit, printed in PeTG 60mm/s no supports fast simple. just print it! its quick :)
Bambu Lab - Faster Start - reduce waiting time | G-code trick Bambu's 'Machine start G-code' preheats the headbed and wait for it to be heaten until the printer moves on with preparations. This change in the machines G-code will move the…
Reduced diameter of head as well as ratcheting surfaces to allow it to fit a slightly smaller syringe inner diameter.
1-1/2" to 1-1/14" [1.5IN to 1.25IN] Pipe Reducer/Coupler/Adapter (No Supports) No Supports required. Used to couple and reduce 1.5" to 1.25" pipes or tubes. 3 Inches of clamp space on each side of the adapter.
I made a flow reducer for the AquaClear 20 hang on back filter. The aim was to make my Bettas new home more comfortable. ---------- V2 ---------- V2: better surface circulation - less circulation in tank Please leave a Like or a Make!
A small 12 too 1 RPM reducer for use with a TT gear motor. Small inline speed reducer. Youtube video of function and build can be seen here. https://youtu.be/01v10qvjFIA Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
Saw the original, liked it and printed it for my son cos this is right up his street. The thinner “front” edge on the big hole started peeling a bit off bed though, so it got a bit messy and needed some sanding and tidying to get rid of…
Leviton supplies a set of rubber grommets to compliment their metal structured wiring media center. Unfortunately, they do not supply a medium size grommet for the medium sized knock-out. This threaded hole reducer fits through the medium…
UPDATE 2025-06-07: I noticed that some filament spools (Overture, etc.) have an open and ribbed ring around the center hole. I added a spacer that has two touch points to accommodate these types of spools. This is a very simple, quick…
I made this to work with https://www.thingiverse.com/thing:3801954 I use it for my Creality Falcon Laser Engraver vent
Had to print this nipple because it was difficult for me to find those parts for my RO water filter nearby. This printed piece definitely saved my weekend project. Tested at 3 bar (~45 psi) water system and working like a charm. You must…
Remixes the main knob so it can be slip-fitted on a skywatcher ST80 stock focuser knob. If you want truly smooth operation , see the anti-wiggle needle mod here :…
The hexagonal plug at the back means it takes up less space on the wall. Yeah a tiny amount :-) but every bit helps for my limited space. *Important Note:* Theres potentially a lot of retraction on the small circles so if you have your…
Check the file here: https://a360.co/4fuqKD3
The art of gears and the brilliance of machinery! 💡 As a gearbox reducer, it reduces speed and increases torque, merging precision design with raw power. 🚀 GearGrind，工業設計的典範，作為一個減速齒輪箱（Gearbox Reducer），它通過精密的齒輪和結構呈現機械的力量與智慧。 Category:…
This is for stiffening the X-Axis of your X-Carve (2015-to early 2017 models). Print instructions Category: Machine Tools Summary This is for stiffening the X-Axis of your X-Carve (2015-to early 2017 models). Per pair, you need: m3 x…
It fits into a tap inside fermentor. Place the inlet facing upwards will let yeast sediment stay wile you transfer cleaner beer.
I made the back of the guitar completely solid. This uses less filament than his version with the supports. I got away with 4 walls and 15% infill at .28 layer height to cut the time down. You can use the center piece from the other remix…
needed a reducer for a cooker hood duct v2 added better version Category: Kitchen & Dining
Someone I know had a Powertec 4" to 2 1/2" reducer that was too small to fit in their Rockler Dust Right Quick Change handle. Both are "4 inches" but there is a roughly 7mm difference in I.D. and O.D. of the two products. It should be…
120mm Fan reducer to 100mm vent tube for Qidi X-Max3 , 120 mm Fan replaced 80mm fan ‘bit of cutting and sanding required’ I then attached 100mm Alloy tubing and vent to wall outlet I had made.Also included is 120mm fan template to mark…
A fully parametric OpenSCAD reducer designed to connect a ~4" duct to a ~2.5" outlet. I built this to adapt the exhaust from a Creality Falcon A1 (~60 mm ID) to an AC Infinity inline fan (~102–103 mm ID). The model uses matched…
I like my cologne to be more subtle, and a single spray was still a bit much for me. This ring fits under the nozzle and blocks it from fully depressing. The nozzle should pull off easily, and you can slip the ring into the space under…
Important There is a chance you might destroy either your board or your stepper motor(s) when trying this! You need to solder resistors on your board. So if you dont know how to solder - sorry this guide is not for you. Furthermore, you…
Should fit right in the bottom of a Kailh choc v1 switch. Reduces the travel distance and makes the switch bottom out sooner. I recommend experimenting a bit with the height and see what works for you. I've found that anything above 0.6mm…
I noticed that the left vent cover didn't fully cover the openings when closed.
A lens protector and kill-flash for your airsoft sniper optic. It was tested with a point blank (less than an inch) Hi-Capa pistol, and all four shots bounced away, however, obviously I cannot guarantee that this model will protect your…
Designed this quick model to be able to remove/reinstall the bushing in the top of Redding reloading presses without having to go out and purchase a very large socket. I recommend printing in a more rigid-material as they can take a…
Reduce an inside-threaded sleeve to a smaller one with inside keyed for insertion and removal. The example shows an M8 threaded sleeve which will be used with an M5 bolt to hold a fixture. More sizes and lengths can be added if requested.
This is a remix of https://www.printables.com/model/22338 I bought different springs that did not compress as much as the original (2.5mm longer than the original https://www.aliexpress.com/item/1005006006967590.html specifically using…
If you want to use slimmer magazines with the famous taco mag pouch
Printable 19:1 cycloidal gearbox for NEMA 17 steppers: twin balanced discs, 6 output pins, 6803 bearings. 19:1 reduction: 20 fixed rollers, 19-lobe cycloidal discs Two discs at 180° so the unit is balanced and vibration-free 6 steel pins…
This 3D printable model is a reducing adapter designed to seamlessly connect ventilator circuits, such as CPAP hoses, with different diameter requirements. It allows for the adaptation between adult and pediatric hose sizes, featuring a…
120mm Fan reducer to 100mm vent tube for Qidi X-Max3 , 120 mm Fan replaced 80mm fan ‘bit of cutting and sanding required’ I then attached 100mm Alloy tubing and vent to wall outlet I had made.Also included is 120mm fan template to mark…
This model hold your device, takes less time than the original, and has a cool apple logo to show your apple pride. (Not original, only updated.)
Should fit right in the bottom of a Kailh choc v1 switch. Reduces the travel distance and makes the switch bottom out sooner. I recommend experimenting a bit with the height and see what works for you. I've found that anything above 0.6mm…
Tested and works with S-150-12 model. Print in PETG.
Original was cute, but 2mil polygons is a bit... excessive. Here's a 60k version, with virtually identical quality.
I think this duct design is at it's core one of the better options you can find for this printer. It does have overhangs though that would be prone to sagging. I made a version with basically identical dimensions, but with chamfers that…
One flaw (of many) of the Prologue is the giant cup holders, any human size cup will fall over, These reducers , reduce the size. flat side faces inwards. -sorry i don't have a photo of it in the car, i made it for someone else and forgot…
I created this for the purposes of making my own sort of BedJet, a fan that is ducted to blow cool air under the mattress. This was designed to replace the original shroud on a Honeywell TurboForce Fan, but it turns out the swirling on…
Cover and noise reducer for the rear of the AD5M bed. I saw there are covers from other makers for the side mounts, and a rear plate for the AD5X, but not the AD5M or 5M Pro. Printed in PETG. Pops into place. Assume it will work well as I…
I needed an adapter for my Dewalt DW734 Thickness Planer to work with my Festool CT26 with the CT CYCLONE large particle debris separator. I couldn't find one so I made one, in two parts. Body and an o-ring. Main Body Printed in PETG 15%…
simple aesthetic card stand for easier placement/removal of cards from stand.
I shoot at reduced distance 7.5m I cut 45mm hole in blank or rifle Sius paper targets. With the 60mm 10m front its possible to make your own target from think paper. Fusion files included for making other sized hole.
This is a tray for your desk, office or gaming set up to reduce clutter. I have found this helpful myself and hope you do to!
I noticed that the left vent cover didn't fully cover the openings when closed.
This reduces/adapts the outlet on the back panel of the Qidi Q2 so that a 2.5 inch PVC dust collection hose can be attached to it. It requires 4 M3 screws. You can either thread the screws directly into the plastic (which works just…
This parametric wedding ring insert allows you to resize a loose ring to match your finger diameter. The model 3MF is included mainly for preview purposes. Measure your ring and play with the inner diameter! The main file is provided in…
The disposable camera lens adapter this is a remix of was able to do 30mm natively, and had parameters to go further out without much issue. For the lens I have, though, I needed it closer to the sensor. I modified the fusion file to…
Purpose and Inspiration This is inspired by a Swedish product named Torrbollen that uses silica to dry cars, etc. If you intend to reduce risk of mouldy cars, print this and insert silica gel packs into the hole in the top. Print…
Tapered reducer to allow easy inflation of an air mattress with a high pressure compressor. 16mm to 23mm tapered cone with a 6mm internal hole for the air gun. Worked on my Anaconda and Kmart air mattresses.
Pipe thread reducer various sizes. DIN ISO 228-1 Inner thread diameter + 0.5% increased from nominal diameter. Outer thread diameter - 0.5% reduced drom nominal diameter.
Reducers and reducer-splitters for PVC/vent-hose, originally designed to attach to an AC Infinity butterfly backdraft gate for attaching to multiple 3D printer enclosures. R4: Only 4 way splitter. Experimental. Supportless attempt. All…
A lens protector and kill-flash for your airsoft sniper optic. It was tested with a point blank (less than an inch) Hi-Capa pistol, and all four shots bounced away, however, obviously I cannot guarantee that this model will protect your…
(I was told OBJ files are better than STL so initially I didn't make an STL folder for the MK III but now it is there.) Latest Update: Introducing the Mark III…
My father wanted to mount / couple this 4 11/16" vent fan to a 3" PVC pipe to draw fresh air into his basement so I made the following. For printing, I split the model as shown in the screenshot and glued the halves together using 8-32…
A fully parametric OpenSCAD reducer designed to connect a ~4" duct to a ~2.5" outlet. I built this to adapt the exhaust from a Creality Falcon A1 (~60 mm ID) to an AC Infinity inline fan (~102–103 mm ID). The model uses matched…
So I really liked these models by dutchmogul. I thought I would remix a few and add to the collection. I've also discovered that resaving the large STLs out from Meshlab reduces the file sizes immensely. FuzzySadist contributed the…
The simplest model for efficient work. It also prevents the machine from sliding on the table. (For this model to fit, the hole in the machine for mounting it to the table must be 10 mm and fit tightly.) I also recommend using this:…
No additional parts are needed. I used: Material: PLA Supports: No Layer: 0,2 Nozzle: 0,4 Brim: Optional BUT geometry its printer-friendly so it will be okay if you use other configs. AND its symmetrical so it works on both hands. UPDATE…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena jednego wariantu
FR La Flashforge Adventurer 5M Pro est une imprimante 3D qualifiée très silencieuse, mais une mauvaise conception du support du ventilateur refroidissant les steppers vient perturber le résultat. Ce support permettra une fixation plus…
I needed to replace an end cap on my NTF system so this is what I created. Works pretty well. Only concern I have is that it may cause too much water to pool but this is iteration 1. If anyone has a recommendation please let me know!…
I needed a Hose reducer but couldn't find the correct size, so i made this one. This Reducer is 5" in length I printed this at 100% infill with No Supports
This is a remix of https://www.printables.com/model/22338 I bought different springs that did not compress as much as the original (2.5mm longer than the original https://www.aliexpress.com/item/1005006006967590.html specifically using…
Alternative moon disc stem with thread to attach the lamp room to so that it doesn't rattle around inside. This makes the puzzle easier and a bit fairer, since normally the lamp room rattling around obfuscates the sounds of the pin. The…
I needed a vent reducer (6" to 4") that could be swapped between being capped off and connecting to a 4" hose. Since I remixed a 4" hose connector model made with magnet slots, these are preserved but I have not personally installed…
This is a remix of https://www.thingiverse.com/thing:4287482 by AgapeIngenium and https://www.printables.com/model/85771 by Jan_Asleep to create a breath reducer wich fits directly on to a MSA Gasmask like the MSA Millennium
This 3D printable model is a reducing adapter designed to seamlessly connect ventilator circuits, such as CPAP hoses, with different diameter requirements. It allows for the adaptation between adult and pediatric hose sizes, featuring a…
Description : This 3D printable model is designed to enhance both the look and functionality of the Creality K1 and K1 Max printers. Mounted on the side fan intake, this fan visualizer spins as the fan operates, offering a visually…
Various size reducer attachments designed to fit on my Ridged Shop Vac Draft angle measured from actual tool for a compression fit. Print fast if you want, no supports or complex geometry. I wanted the 0.5 inch internal diameter to suck…
This video goes into more details about how these items are used. The Yarn Parker is device that clips onto the front of the EEW 6 eSpinner and helps hold yarn. The Slitted Reducer goes on the front as another option to park yarn…
Flow reducer for the Grohe water flushing cistern. Replacement for model 42300000
A pipe joiner that joins 0.75in.(19mm.), pipe to 0.5mm.(12.5mm.) pipe. PETG recommended for outside use. Increasing wall count or infill to 100% for better strength. No supports
The phomemo m04s printer supports several different paper roll widths down from 50mm sticker paper up to 110mm paper. However, when using any width apart from the 110mm width, I have had difficulties placing and stabilising the paper…
This model both lowers the height of the shower head as well as allowing the head to swivel to different positions. PLA 0.4 mm Layer Height 2 Perimeters 15% In-Fill
The new spherical Quark-Puzzle provides a 3D model of the quark model of hadrons and the basic conditions under which quarks form hadrons (e.g. neutrons or protons), as dictated by quantum chromodynamics. Quark flavour, quark generations,…
Insert these small discs into the center post of MX or Kailh Choc style keyswitches to reduce the total travel. The discs themselves are printed “floating” on top of a square raft. They print much more reliably on the raft, than directly…
A cool looking stackable desk organizer to help reduce clutter. The lid should have a satisfying click when closed. There are two lids one with a triangular pattern and one with a hexagonal pattern. New lid that can hold pens at…
I designed this weight - reduced hook to be able to hold both an object you'll normally hang (a piece of clothing / keychain) and also a cloth hanger (poke the hanger through the hook holes) To print this hook you'll need to print two…
Spool for Bambu Labs filament refills with external diameter reduced to be printable on an A1 MINI. The internal diameter is unchanged. This spool may not work on Bambu Labs large AMS and other rim roller type filament holders. The photo…
This model hold your device, takes less time than the original, and has a cool apple logo to show your apple pride. (Not original, only updated.)
Spool for Bambu Labs filament refills with external diameter reduced to be printable on an A1 MINI. The internal diameter is unchanged. This spool may not work on Bambu Labs large AMS and other rim roller type filament holders. This…
This is only the tray. The pipe is the same as the original source model.
This sleeve fixes problems with the Bambu Labs A1 Mini filament spool holder. Greatly reduces rotational friction and wear. Centers and aligns the spool, eliminates wobble. It is made of two parts that click together around the original…
Tall, extendable faucets are great for cleaning or filling pots, but the water tends to spray beyond the sink whenever you wash your hands or small things. For this reason, I designed an element that lowers the height of the faucet head,…
This funnel can be used to install a 100mm fan if the pipe has either a slightly bigger diameter. In my case the pipe in the wall hat a slightly smaller diameter so i cut it out as far as possible and used this funnel to connect the fan…
I currently have to keep adding water to my heating system because the pressure is unstable and water is leaking somewhere in the heating pipes in the house. To ensure that refilling remains a clean and dry process while waiting for an…
![1-1/2" to 1-1/14" [1.5IN to 1.25IN] Pipe Reducer/Coupler/Adapter (No Supports)](https://media.printables.com/media/prints/467707/images/3833779_84360414-c412-4bb7-8416-d7704ab80c4f/f360.png)
![[Remix] The Cat 2 (reduced)](https://media.printables.com/media/prints/1196366/images/8988611_9d515713-c22a-44bd-b2fb-0552f3d5ec4c_ed504f78-dddf-486d-98cf-c04d50395c0e/2025-02-17-22_18_15-kitty60k-orcaslicer.jpg)
![[Remix] Kingroon KP3s Pro V2 - Fan duct (redesign (STEP) and reduced (2x STL))](https://media.printables.com/media/prints/20b7aafb-fcc9-420b-af49-b4f14f45c301/images/10859124_8d45adaa-c782-4689-8a4b-a2aa0410be4b_e61b82b1-7094-44b6-8ae3-0af886071564/2025-10-09-23_49_25.jpg)
