Dust Collection Reducer: 6 inch to 4 inch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces the factory Y fitting for most 1.5HP dust collectors, Fits over a 6" inlet and inside 4" flex hose
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 449
- Wydruki
- 1
- Wyświetlenia
- 1602
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This piece replaces the factory Y fitting on most dust collectors with a 6" inlet. This will substantially reduce the turbulence of the Y fitting and increase airflow by reducing the drag through the system, resulting in fewer clogs and better chip collection. You likely will want to drill a hole through this fitting to align with your factory attachment screw hole. This does however confine you to a single hose, however if you only run one machine at a time a wheel this from machine to machine, this is likely the a better solution for you.