1 / 3
IKEA Yuppienalle Phone Stand (print-in-place) REMIX - Reduced Pin Diameter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original model pin tolerance was too tight, I reduced the pin's diameter and now works perfectly.
- Ocena
- 4 / 5
- Polubienia
- 20
- Pobrania
- 294
- Wydruki
- 1
- Wyświetlenia
- 1094
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (14)Powiązane
Original model pin tolerance was too tight, I reduced the pin's diameter and now works perfectly.
I printed it in PLA and only 5% infill and feels light and sufficiently strong. Tougher material and higher infill density would be best, but this works just fine as well.