1 / 4
6mm to 4mm OD PTFE tube reducer eSun eBox Lite to bambulab X1C X1 P1P — zdjęcie 1
1 / 4

6mm to 4mm OD PTFE tube reducer eSun eBox Lite to bambulab X1C X1 P1P

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Reducer for the 6mm filament tube out of the eSun eBox Lite into the 4mm filament tube that Bambulab uses

Ocena
5 / 5
Polubienia
27
Pobrania
247
Wydruki
4
Wyświetlenia
1305
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Made this so that I could mount my eSun eBox lite filament tube directly to the Y splitter I just printed. Now when printing with non AMS compatible materials, of any size without spool adapters as it has bottom rollers, I don't have to change tubes over. Thought if it solved an issue there might be someone else out there that would benefit from it too. Any Issues leave a comment and I can edit the model to suit or I can upload the SolidWorks file if needed. Have included a pre sliced file as well printing with a 0.4mm nozzle and 0.12 layer height that worked well on my X1C and PLA pro.

Uses a friction fit and so far haven't had any issues. Could scale to 99% or 98% if too loose or scale up to 101% or 102% if too tight.

Tagi