6mm to 4mm OD PTFE tube reducer eSun eBox Lite to bambulab X1C X1 P1P
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reducer for the 6mm filament tube out of the eSun eBox Lite into the 4mm filament tube that Bambulab uses
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 248
- Makes
- 4
- Views
- 1,306
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
Made this so that I could mount my eSun eBox lite filament tube directly to the Y splitter I just printed. Now when printing with non AMS compatible materials, of any size without spool adapters as it has bottom rollers, I don't have to change tubes over. Thought if it solved an issue there might be someone else out there that would benefit from it too. Any Issues leave a comment and I can edit the model to suit or I can upload the SolidWorks file if needed. Have included a pre sliced file as well printing with a 0.4mm nozzle and 0.12 layer height that worked well on my X1C and PLA pro.
Uses a friction fit and so far haven't had any issues. Could scale to 99% or 98% if too loose or scale up to 101% or 102% if too tight.
