1 / 2
Repair handle for tensioning handle, clamping handle Spanngriff
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This a a repair handle for a tensioner that i accidentially cut into half
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The new handle was designed to be more ergonical in terms of girp.
This version was fixed with a insert - and a a split but can be used in principle for a rount shaft with a diameter of 13 mm / can be enlarged by mechanical reworking if necessary- the depth of the front bore is 25 mm
Would recommend a perimeter of 3
I have also used a layer height of 0.2 mm
So far the handle works again - lets see what the future brings :-)
If the model is of use for you please leave a like.