1 / 2
Repair handle for tensioning handle, clamping handle Spanngriff — image 1
1 / 2

Repair handle for tensioning handle, clamping handle Spanngriff

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This a a repair handle for a tensioner that i accidentially cut into half

Rating
0 / 5
Likes
2
Downloads
5
Makes
0
Views
48
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

The new handle was designed to be more ergonical in terms of girp.

This version was fixed with a insert - and a a split but can be used in principle for a rount shaft with a diameter of 13 mm / can be enlarged by mechanical reworking if necessary- the depth of the front bore is 25 mm

Would recommend a perimeter of 3 

I have also used a layer height of 0.2 mm

So far the handle works again - lets see what the future brings :-)

 

If the model is of use for you please leave a like.

Tags